Terastation TS-QVHL
Specs
| CPU | Intel Atom D510 1.66GHz Dual-Core (64-bit) |
| Memory | 2 GB DDR2 (Upgradable to 4GB) |
| Bays | 4 |
| Network | 2x 10/100/1000 Mbps (Marvell 88e8059) |
| Sata | 4x SATA II (Intel 82801ir) |
| USB 2.0 | 2x Back |
| USB 3.0 | 2x Back (D720200) |
| Serial port | 1x Back |
| VGA | Yes |
| Fan | 1x |
| Power | Internal AC 100-240V, universal 50/60Hz |
Stock Firmware Installation
You can re-install the linux-based firmware by creating a recovery disk, see Create Recovery Disk for Intel-based Terastation You can then boot from it by switching the boot mode switch on the back to "USB", after a few minutes the device will go into EM Mode Then you can install the firmware using the firmware updater in debug mode, see Enable Debug mode for LSUpdater/TSUpdater
Custom Firmware/Operating System installation
These devices run on an Intel Atom processor with a fairly typical BIOS and include a VGA out and support USB keyboards, you should be able to run virtually any operating system that will run on a normal PC depending on drivers/etc.
For tools to help install and configure Debian on these devices, see Installing Debian on Intel Terastations
Pictures
DMESG output