Linkstation LS710D
Specs
| CPU | 6-Core Realtek RTD1619 |
| Memory | 2GB |
| Bays | 1 |
| Network | 1x 2.5GbE RTL8168g |
| Sata | 1 |
| NAND Flash | |
| SPI Flash | |
| USB 2.0 | |
| USB 3.0 | |
| Fan | |
| Power |
Stock Firmware Installation
Device Notes
Root Access
java -jar acp_commander.jar -t 192.168.1.204 -c "sed -i 's/rbash/bash/g' /etc/passwd" java -jar acp_commander.jar -t 192.168.1.204 -c "ln -s /bin/busybox /bin/su" java -jar acp_commander.jar -t 192.168.1.204 -c 'echo "admin ALL=(ALL) ALL" >> /etc/sudoers' java -jar acp_commander.jar -t 192.168.1.204 -c 'echo 127.0.0.1 $(hostname) >> /etc/hosts' java -jar acp_commander.jar -t 192.168.1.204 -o $ telnet 192.168.1.204 Trying 192.168.1.204... Connected to 192.168.1.204. Escape character is '^]'. BUFFALO INC. LinkStation series LS710D-EM82D login: admin Password: admin@LS710D-EM82D:~$ sudo su - [sudo] password for admin: root@LS710D-EM82D:~#
Pictures
Serial Console
To enable the serial header simply bridge R101 and R102
U-Boot Output
C1:80000000
C2h
hwsetting size: 000009fc
-------------------- Tx ODT Scan ----------------------
ODT40, Weight = 0x0000001e
ODT60, Weight = 0x00000026
Best Tx ODT = ODT60
------------------- DQS Calibration -------------------
DQS0 Map = [0x00000014, 0x0000001c], Width = 0x00000009
DQS0 Best PI = 0x00000018
DQS1 Map = [0x00000013, 0x0000001c], Width = 0x0000000a
DQS1 Best PI = 0x00000018
DQS2 Map = [0x00000013, 0x0000001c], Width = 0x0000000a
DQS2 Best PI = 0x00000018
DQS3 Map = [0x00000014, 0x0000001c], Width = 0x00000009
DQS3 Best PI = 0x00000018
BSTC verify: OK
DDR calibration done
REG32(VO_SW_SEC_1) = 0x01ce07fd
warmboot_indicator = 0x000820a1
C3
DTE_Bootcode Flash Addr = 0x00012600
DTE_Bootcode Flash Length = 0x00044a00
DTE_Bootcode target addr = 0x10120000
C4
C5
jump to FSBL_DDR: 0x10120000
FSBL_DDR: Jun 26 2019, 15:46:57
p_FW_Entry_DTE_FW_Certificate: type: 10, flash_addr: 0x20c00, length: 0x400, emmc_partition: 0
p_FW_Entry_DTE_BOOTCODE_RTK: type: 16, flash_addr: 0x180800, length: 0x180000, emmc_partition: 0
p_FW_Entry_BL31: type: 17, flash_addr: 0x28800, length: 0x10234, emmc_partition: 0
p_FW_Entry_TEEOS: type: 18, flash_addr: 0x38c00, length: 0x147a84, emmc_partition: 0
p_FW_Entry_PCPU_FW_Certificate: type: 2, flash_addr: 0x20800, length: 0x400, emmc_partition: 0
p_FW_Entry_PCPU_FW: type: 14, flash_addr: 0x21800, length: 0x7000, emmc_partition: 0
process_bl31: 0x0
process_dte_fw_certificate: 0x0
process_dte_bootcode_rtk: 0x0
jump to BL31: 0x80001000
VERBOSE: bl31_setup
INFO: BL31: v1.2(debug):778a489
INFO: BL31: Built : 10:44:49, Sep 19 2019
INFO: SB2_DUBUG on
INFO: Move a_entry
INFO: Move exc_redirect
INFO: Move exc_dispatch
INFO: ACPU images done
INFO: BL31: Initializing runtime services
INFO: Start to init service std_svc
INFO: Finish to init service std_svc
INFO: Start to init service opteed_fast
INFO: Finish to init service opteed_fast
INFO: EXIT BL31
INFO: bl31_to_kernel: kernel_resume_entry = 0x0
INFO: bl31 jumps to EL2: LK entry
U-Boot 2015.07-11efd3d (Nov 18 2020 - 11:17:05 +0900)
CPU : Cortex-A55 Quad Core - AARCH64
Board: Realtek QA Board
DRAM: 2 GiB
Watchdog: Disabled
mapping memory 0x20000000-0x40000000 non-cached
flushing dcache successfully.
MMC: Initialize eMMC in fast flow
emmc:dummy_buffer=0x00200000, dummy_512B=0x00200008
switch frequency to 0x46
frequency divider is 0x80
switch frequency to 0x46
frequency divider is 0x4
switch to SDR 8 bit
switch bus width to 0x8 bits success
switch speed to 0x1 success
switch frequency to 0x57
frequency divider is 0x1
Factory: MMC
Factory: pp:1, seq#:0x29, size:0x20400
------------can't find tmp/factory/000BootParam.h
NOTICE: [Thor B00] process_PCPU_FW
NOTICE: Load PCPU Certificate from Flash ok
NOTICE: Load PCPU FW from Flash ok
INFO: REG32(0x9800006c) = 0x1NOTICE: Start to Load Cert by mailbox
NOTICE: SEND_PCPU_OTP_DATA
NOTICE: Load Cert by mailbox Done
NOTICE: Load Cert by mailbox Done
NOTICE: Start to verify Cert
NOTICE: Start to Load PCPU FW by mailbox
NOTICE: Load PCPU FW by mailbox Done
NOTICE: Start to verify PCPU FW
NOTICE: PCPU FW Start
In: serial
Out: serial
Err: serial
HDMITx_HPD=False
------------can't find tmp/factory/hdmitx_format.bin
------------can't find tmp/factory/video_rpc.bin
tv_system=25 mode=1
Net: check patch key = 5600
Realtek PCIe GBE Family Controller mcfg = 0024
dev->name=r8168#0
init control GPIO
set_type = 0 (0: high, 1: normal, 2: low, 3: stop)
set FAN -> high
Checking default environment
Hit Esc or Tab key to enter console mode or rescue linux: 0
Power-Key stat:1
check_acpu_boot_notification, boot-reason : 0x00420000
check_rtc_expire:RTC not detected in factory
customize_check_normal_boot: power up by button
set_kernelargs_for_buffalo : set kernelargs -> BOOTVER=0.22 root=/dev/ram0 rw ramdisk_size=131072 initrd=0x05000000,32M init=/init boot=buffalofirm boot_device_type=eMMC ubootenv=0x621400,0x20000,0x4
,0x00@mmcblk0 ubootenv_redund=0x821400,0x20000,0x4,0x00@mmcblk0
[ENV] Writing to Factory...
[FAC] factory_save: MMC
[FAC] Save to eMMC (blk#:0x3108, buf:0x07000000, len:0x20a00)
[FAC] Save to eMMC (seq#:0x2a, pp:0)
done
rtk_plat_do_bootb_u : Step 1 -> load kernelDT from 0x00078592 to 0x34603008 with size 0x02097152
rtk_plat_do_bootb_u : Step 2 -> load kernel from 0x00082688 to 0x35651584 with size 0x25165824
PCPU_FW_START
rtk_plat_do_bootb_u : Step 3-1 -> load initrd from 0x00266241 to 0x83886080 with size 0x16777216
rtk_plat_do_bootb_u : Step 3-2 -> load initrd from 0x00299009 to 0x100663296 with size 0x16777216
do booti -> booti $kernel_loadaddr - $fdt_loadaddr
Wrong Image Format for do_booti command
ERROR: can't get kernel image!
Not raw Image, Starting Decompress Image.gz...
## Flattened Device Tree blob at 02100000
Booting using the fdt blob at 0x2100000
reserving fdt memory region: addr=f900000 size=307000
reserving fdt memory region: addr=0 size=100000
reserving fdt memory region: addr=2f000 size=1000
reserving fdt memory region: addr=1ffe000 size=4000
reserving fdt memory region: addr=10000000 size=14000
reserving fdt memory region: addr=3200000 size=c700000
reserving fdt memory region: addr=2600000 size=c00000
reserving fdt memory region: addr=16200000 size=15300000
Using Device Tree in place at 0000000002100000, end 000000000210f56d
[FDT] mac = 00:10:20:30:40:50
[FDT] update MAC address
Bring UP slave CPUs
EVVVE
eb1VEESRBRBBtOOSREOBSSOE:S EE:::R bb lbB3Ol13l_a3S rseE1:t_sbtliu3p
_N_1nltIg_su3p 1
eFstKesIeupettrupN
uO
FI :ep
: B :L 3 1B : vF:O
BL1 . O: B
g82 L3 L21 f3BlLu(313:d1e1:: vbvu 1sv:1h1g.. 2.)(idnv2:e71b.(u2d7eg8)(adb4u:8g7e7 9
7 c a7e7 88BabLua379::
7 :1 c: 448gI)8N99F:
I8IahNBeN FuOFiO lB:t4 : :8 9 L1s 3
44: 9444NL4c3L1e:1F:O4 s3B1s9u:: : ,fB uiBSue iBulipt L 3l:lt1 l l1::1 0t19 :yB :4 u4i2:01400l:9t,: 44:4 .S411
I,:
9[21 S190 49S9,Ne p, 1 1S9 Sep9eFp2 0129O: 2019 190
9 1BI
NI2
N
FF_IINON:DFUFOO :O B U :G S o n B
nDUSBN22B_F2D_DO: _:DU UBBUU BGU GU G So Bo 2on_
I
NIUNn
iO LFI31OG:N :F oF OnI:n
it :It N iFO : B aL B lLBiz3Bin31g L1ruL3nt:3i:1:m I1eni :tiIIal ni itzsianiliIizienngnr tvirgceius
inIat NilFOam: rl iuizezin gnse Srvirictnesti
vStrrtNn tmFo eintritOi mes: sueersnvi ecer st
s arivt imtoIc ie iNceens
o nsinciiOs: :t d Se_ta rrt s sert vivocevi s ctd S_ctasirt v te
F Nt t
sOIN eFO
itasho :sIe:Nrr v vF i Ocei s ctd: _sF ve ci FS in tisnsh
tItoid_r svNtc nF
iI itOton: Ni F tOs si:er nvie ce r si t dtFiv_niFish i tssocer vviniceei sc tdn _s
sstesvtoIt itNnic tdse rvFsic_Oe
oc dI_:NsrFOv :v c Sv tacirt t
iO:e NF
ed_r F niSInitishsa tNto tFinr idsettrvO ic_:e s st oo einvSitpc srtertvv iciae ecst
in_Nitof s t o I
tO: peFterIedav_fOsasN:t iF
e c
I NI Fo OptNSeeSFd:O:_t tf aFia niarsrt hsto it nit t t sF
eeid_rFOio: n vi niFit iiseisrvcnicneeh o iptioee td_stfaphs ttto o ins itee s
Ii farvstnv
tiNicI eNFFsO:cO e e o opt:Eeer d_pvfaXts eetId_i fa cstT
eBLI
: io Fn 1NFO
e isEIh OXtpITo: BN L3tF1
F bt l3 asnNt:FO i:
1ise_Ir NFvtO:ni i obEXc_IskeTernl elh3: keBor1ptnLeeted__ofa3tstl1
I_oNF
rOies:Ium_ e_nkenNitr FyeO: t= r EX nIT b sl3B01_eLtoel_kxrer30n:
eO: Nvk1i:ecF
os Irk ner nN beol3el1 FljupOmp_ts_ee rd_:tfar stee
0 nx0l blse31Nu_tEFo__Lkm2:ee LOrK e:enn_trnty ry e =e
0bre: yNFkXeI Tr O:ne= BL l3_0x1
2_:psk eum1FOeO:: j _eu n t m b p rysb l3l3 1=to j1 _ 0ELuxmto0
K LINtKorn eFeO El:nLt: 2r: ky e Lrn
s _t lel_3rn1 ejtsruumypm e
e enot ErLy 2=: 0LKx0
ntIrNFyO :
bl31 jumps to EL2: LK entry
DMESG output
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.119-0000000-generic ([email protected]) (gcc version 7.5.0 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) ) #1 SMP PREEMPT Tue Oct 27 10:22:47 UTC 2020 [ 0.000000] Boot CPU: AArch64 Processor [411fd050] [ 0.000000] DT: logo_start_addr 0x30000000, size 0x900000 [ 0.000000] DT: free_logo_reserved_region 0 [ 0.000000] DT: saving_section_page_table 0 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000098007800 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] rsvmem_remap_setup 234, not remap common@0 now [ 0.000000] rsvmem_remap_setup 234, not remap ringbuf@0 now [ 0.000000] rsvmem_remap_setup 234, not remap rbus@0 now [ 0.000000] cma: size 0x0000000002000000, base 0x0000000000000000, fixed(0) [ 0.000000] cma: Reserved 32 MiB at 0x000000007e000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] percpu: Embedded 22 pages/cpu @ffffffc07df2e000 s52376 r8192 d29544 u90112 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516096 [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0x98007800 console=ttyS0,115200 BOOTVER=0.22 root=/dev/ram0 rw ramdisk_size=131072 initrd=0x05000000,32M init=/init boot=buffalofirm boot_ device_type=eMMC ubootenv=0x621400,0x20000,0x4,0x00@mmcblk0 ubootenv_redund=0x821400,0x20000,0x4,0x00@mmcblk0 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Memory: 1432340K/2097152K available (8190K kernel code, 1096K rwdata, 2472K rodata, 3392K init, 1423K bss, 632044K reserved, 32768K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008280000 - 0xffffff8008a80000 ( 8192 KB) [ 0.000000] .rodata : 0xffffff8008a80000 - 0xffffff8008cf0000 ( 2496 KB) [ 0.000000] .init : 0xffffff8008cf0000 - 0xffffff8009040000 ( 3392 KB) [ 0.000000] .data : 0xffffff8009040000 - 0xffffff8009152008 ( 1097 KB) [ 0.000000] .bss : 0xffffff8009152008 - 0xffffff80092b5c54 ( 1424 KB) [ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf02000000 ( 32 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 MB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000ff140000 [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 27.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns [ 0.000003] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns [ 0.009083] rmem_count: 3 [ 0.012945] [ 0.014586] rsvmem_remap 143, rmem->name common@0 [ 0.020763] rsvmem_remap 151, type rsvmem-remap [ 0.026759] rsvmem_remap 163, ioremap(2f000,1000) [ 0.032948] rsvmem_remap 175, remap addr ffffff8008015000 [ 0.039905] rsvmem_remap 184, save_remap_name common [ 0.046381] rsvmem_remap 203, save rpc_common_base [ 0.052661] rsvmem_remap 216, init common@0/common done [ 0.059420] [ 0.061059] rsvmem_remap 143, rmem->name ringbuf@0 [ 0.067330] rsvmem_remap 151, type rsvmem-remap [ 0.073318] rsvmem_remap 163, ioremap(1ffe000,4000) [ 0.079698] rsvmem_remap 175, remap addr ffffff8008018000 [ 0.086654] rsvmem_remap 184, save_remap_name ringbuf [ 0.093219] rsvmem_remap 210, save rpc_ringbuf_base [ 0.099596] rsvmem_remap 216, init ringbuf@0/ringbuf done [ 0.106550] [ 0.108190] rsvmem_remap 143, rmem->name rbus@0 [ 0.114185] rsvmem_remap 151, type rsvmem-remap [ 0.120173] rsvmem_remap 163, ioremap(98000000,200000) [ 0.126838] rsvmem_remap 175, remap addr ffffff8009800000 [ 0.133785] rsvmem_remap 184, save_remap_name rbus [ 0.140064] rsvmem_remap 188, save rbus_addr [ 0.145768] rsvmem_remap 195, set rtk_rbus_barrier_flag to 1 [ 0.153017] rsvmem_remap 216, init rbus@0/rbus done [ 0.159698] Console: colour dummy device 80x25 [ 0.164648] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=108000) [ 0.176139] pid_max: default: 32768 minimum: 301 [ 0.181414] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.188865] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.197359] ftrace: allocating 29916 entries in 117 pages [ 0.249257] sched-energy: CPU device node has no sched-energy-costs [ 0.256247] Invalid sched_group_energy for CPU0 [ 0.261281] CPU0: update cpu_capacity 1024 [ 0.265862] ASID allocator initialised with 32768 entries [ 0.352137] Detected VIPT I-cache on CPU1 [ 0.352164] GICv3: CPU1: found redistributor 100 region 0:0x00000000ff160000 [ 0.352191] Invalid sched_group_energy for CPU1 [ 0.352193] CPU1: update cpu_capacity 1024 [ 0.352195] CPU1: Booted secondary processor [411fd050] [ 0.384181] Detected VIPT I-cache on CPU2 [ 0.384202] GICv3: CPU2: found redistributor 200 region 0:0x00000000ff180000 [ 0.384219] Invalid sched_group_energy for CPU2 [ 0.384221] CPU2: update cpu_capacity 1024 [ 0.384223] CPU2: Booted secondary processor [411fd050] [ 0.416238] Detected VIPT I-cache on CPU3 [ 0.416256] GICv3: CPU3: found redistributor 300 region 0:0x00000000ff1a0000 [ 0.416272] Invalid sched_group_energy for CPU3 [ 0.416274] CPU3: update cpu_capacity 1024 [ 0.416276] CPU3: Booted secondary processor [411fd050] [ 0.448300] Detected VIPT I-cache on CPU4 [ 0.448318] GICv3: CPU4: found redistributor 400 region 0:0x00000000ff1c0000 [ 0.448334] Invalid sched_group_energy for CPU4 [ 0.448336] CPU4: update cpu_capacity 1024 [ 0.448338] CPU4: Booted secondary processor [411fd050] [ 0.480366] Detected VIPT I-cache on CPU5 [ 0.480382] GICv3: CPU5: found redistributor 500 region 0:0x00000000ff1e0000 [ 0.480398] Invalid sched_group_energy for CPU5 [ 0.480400] CPU5: update cpu_capacity 1024 [ 0.480402] CPU5: Booted secondary processor [411fd050] [ 0.480475] Brought up 6 CPUs [ 0.622017] SMP: Total of 6 processors activated. [ 0.627246] CPU features: detected feature: GIC system register CPU interface [ 0.635177] CPU features: detected feature: Privileged Access Never [ 0.642129] CPU features: detected feature: User Access Override [ 0.648805] CPU features: detected feature: 32-bit EL0 Support [ 0.655287] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.666547] CPU: All CPU(s) started at EL2 [ 0.671111] alternatives: patching kernel code [ 0.676810] Invalid sched_group_energy for CPU5 [ 0.681849] Invalid sched_group_energy for Cluster5 [ 0.687264] Invalid sched_group_energy for CPU4 [ 0.692297] Invalid sched_group_energy for Cluster4 [ 0.697711] Invalid sched_group_energy for CPU3 [ 0.702744] Invalid sched_group_energy for Cluster3 [ 0.708158] Invalid sched_group_energy for CPU2 [ 0.713190] Invalid sched_group_energy for Cluster2 [ 0.718613] Invalid sched_group_energy for CPU1 [ 0.723645] Invalid sched_group_energy for Cluster1 [ 0.729059] Invalid sched_group_energy for CPU0 [ 0.734082] Invalid sched_group_energy for Cluster0 [ 0.740113] devtmpfs: initialized [ 0.751341] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.762179] futex hash table entries: 2048 (order: 6, 262144 bytes) [ 0.770167] xor: measuring software checksum speed [ 0.815538] 8regs : 2274.000 MB/sec [ 0.860230] 8regs_prefetch: 2074.000 MB/sec [ 0.905306] 32regs : 2896.000 MB/sec [ 0.949989] 32regs_prefetch: 2682.000 MB/sec [ 0.955120] xor: using function: 32regs (2896.000 MB/sec) [ 0.961166] pinctrl core: initialized pinctrl subsystem [ 0.967489] NET: Registered protocol family 16 [ 0.988464] cpuidle: using governor ladder [ 1.009043] cpuidle: using governor menu [ 1.013597] vdso: 2 pages (1 code @ ffffff8008a86000, 1 data @ ffffff8009044000) [ 1.021821] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 1.029950] DMA: preallocated 256 KiB pool for atomic allocations [ 1.036946] [PINCTRL] driver init [ 1.041280] [PINCTRL] init done [ 1.045272] [RTK_SB2_DBG] sb2_dbg_probe [ 1.049586] [RTK_SB2_DBG] info 0x10000 [ 1.053750] [RTK_SB2_DBG] use smc 1 [ 1.057937] rtk-mmio 98000000.mmio: use secure config [ 1.063388] rtk-mmio 98000000.mmio: use hw semaphore [ 1.068984] rtk-rtd16xx-cc 98000000.clocks: use mmio regmap [ 1.075348] rtk-rtd16xx-cc 98000000.clocks: initialized [ 1.081352] rtk-cgc 98000050.clk-en: initialized [ 1.086694] rtk-cgc 98000054.clk-en: initialized [ 1.091996] rtk-cgc 98000058.clk-en: initialized [ 1.097327] rtk-cgc 9800005c.clk-en: initialized [ 1.102684] rtk-cgc 9800708c.clk-en: initialized [ 1.107973] rtk-rtd16xx-reset 98000000.soft-reset: io mem type is regmap [ 1.115525] rtk-rtd16xx-reset 98000000.soft-reset: initialized [ 1.122185] rtk-mmio 98007088.mmio: use hw semaphore [ 1.127780] rtk-reset 98007088.soft-reset: use mmio regmap [ 1.133956] rtk-reset 98007088.soft-reset: initialized [ 1.139817] rtk-reset 98007088.usb-async-soft-reset: use mmio regmap [ 1.146955] rtk-reset 98007088.usb-async-soft-reset: initialized [ 1.153897] rtk-rtd16xx-power 98007000.power-domain: initialized [ 1.163137] [RTD16xx_gpio-suspend] wakeup-gpio Cnt: en(2) act(2) list(2) [ 1.170672] [RTD16xx_gpio-suspend] wakeup-gpio[0] Successful registration! (en:1 act:0 gpio:2) [ 1.180398] [RTD16xx_gpio-suspend] wakeup-gpio[1] Successful registration! (en:1 act:0 gpio:45) [ 1.190197] [RTD16xx_gpio-suspend] gpio-output-change Cnt: en(0) act(0) list(-2) [ 1.288838] raid6: int64x1 gen() 390 MB/s [ 1.360844] raid6: int64x1 xor() 383 MB/s [ 1.432964] raid6: int64x2 gen() 653 MB/s [ 1.504998] raid6: int64x2 xor() 663 MB/s [ 1.577071] raid6: int64x4 gen() 924 MB/s [ 1.649112] raid6: int64x4 xor() 753 MB/s [ 1.721153] raid6: int64x8 gen() 783 MB/s [ 1.793236] raid6: int64x8 xor() 652 MB/s [ 1.865308] raid6: neonx1 gen() 708 MB/s [ 1.937330] raid6: neonx1 xor() 911 MB/s [ 2.009449] raid6: neonx2 gen() 1037 MB/s [ 2.081461] raid6: neonx2 xor() 1080 MB/s [ 2.153535] raid6: neonx4 gen() 1398 MB/s [ 2.225590] raid6: neonx4 xor() 1220 MB/s [ 2.297641] raid6: neonx8 gen() 1432 MB/s [ 2.369701] raid6: neonx8 xor() 1177 MB/s [ 2.374507] raid6: using algorithm neonx8 gen() 1432 MB/s [ 2.380581] raid6: .... xor() 1177 MB/s, rmw enabled [ 2.386157] raid6: using intx1 recovery algorithm [ 2.391504] ACPI: Interpreter disabled. [ 2.395852] [RTD16xx_PM] Initial Power Management [ 2.401207] [RTD16xx_PM] wakeup flags = 0x3d [ 2.406068] [rstctrl] addr 0xffffff8008095640 [ 2.411098] rtk-usb-manager 98000000.rtk_usb_power_manager: ENTER rtk_usb_manager_probe [ 2.420161] rtk-usb-manager 98000000.rtk_usb_power_manager: parse_gpio_setting get power-gpio (id=57) OK [ 2.430838] rtk-usb-manager 98000000.rtk_usb_power_manager: parse_gpio_setting get power-gpio (id=48) OK [ 2.441529] rtk-usb-manager 98000000.rtk_usb_power_manager: parse_gpio_setting get power-gpio (id=49) OK [ 2.451776] mac_node: rtk_dwc3_drd status is okay [ 2.457087] rtk-usb-manager 98000000.rtk_usb_power_manager: __of_parse_port_gpio_mapping port0 mapping gpio_num=57 [ 2.468760] mac_node: rtk_dwc3_u2host status is okay [ 2.474360] rtk-usb-manager 98000000.rtk_usb_power_manager: __of_parse_port_gpio_mapping port1 mapping gpio_num=48 [ 2.486016] mac_node: rtk_dwc3_u3host status is okay [ 2.491616] rtk-usb-manager 98000000.rtk_usb_power_manager: __of_parse_port_gpio_mapping port2 mapping gpio_num=49 [ 2.502745] rtk_usb_soc_init START (/build/F0024_buffalonas_kernel_src/drivers/soc/realtek/rtd16xx/rtk_usb.c) [ 2.513910] rtk_usb_soc_init END [ 2.518418] rtk-usb-manager 98000000.rtk_usb_power_manager: Realtek USB init OK [ 2.526676] rtk-usb-manager 98000000.rtk_usb_power_manager: __gpio_on_off to set power off by gpio (id=57) OK [ 2.537855] rtk-usb-manager 98000000.rtk_usb_power_manager: __gpio_on_off to set power (power_low_active) off by gpio (id=48) OK [ 2.550891] rtk-usb-manager 98000000.rtk_usb_power_manager: __gpio_on_off to set power (power_low_active) off by gpio (id=49) OK [ 2.563914] rtk_usb_set_hw_l4icg_on_off set l4_icg port 0 [ 2.569988] rtk_usb_set_hw_l4icg_on_off set l4_icg port 1 [ 2.576069] rtk_usb_set_hw_l4icg_on_off set l4_icg port 2 [ 2.582243] rtk-usb-manager 98000000.rtk_usb_power_manager: create_debug_files [ 2.590049] rtk-usb-manager 98000000.rtk_usb_power_manager: rtk_usb_manager_probe OK (take 180 ms) [ 2.600370] SCSI subsystem initialized [ 2.604683] usbcore: registered new interface driver usbfs [ 2.610633] usbcore: registered new interface driver hub [ 2.616700] usbcore: registered new device driver usb [ 2.622879] rtk-efuse 98017000.efuse: initialized [ 2.628097] Advanced Linux Sound Architecture Driver Initialized. [ 2.635354] cpu-volt-sel: dev_pm_opp_set_prop_name: name=tt [ 2.642033] clocksource: Switched to clocksource arch_sys_counter [ 2.677273] VFS: Disk quotas dquot_6.6.0 [ 2.681770] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.689609] FS-Cache: Loaded [ 2.692912] pnp: PnP ACPI: disabled [ 2.703928] NET: Registered protocol family 2 [ 2.709278] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 2.717168] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 2.724807] TCP: Hash tables configured (established 16384 bind 16384) [ 2.732225] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 2.739020] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 2.746449] NET: Registered protocol family 1 [ 2.751482] RPC: Registered named UNIX socket transport module. [ 2.758156] RPC: Registered udp transport module. [ 2.763445] RPC: Registered tcp transport module. [ 2.768740] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.776156] Trying to unpack rootfs image as initramfs... [ 3.622359] Freeing initrd memory: 32768K [ 3.630559] Kernel event proc (C) BUFFALO INC. V.1.00 installed. [ 3.637340] MICON ctrl (C) BUFFALO INC. V.1.00 installed. [ 3.643165] UPSDRV (C) BUFFALO INC. V.1.10 installed. [ 3.648859] BUFFALO UPS Recover Function Initialized. [ 3.655782] workingset: timestamp_bits=46 max_order=19 bucket_order=0 [ 3.663844] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 3.670859] NFS: Registering the id_resolver key type [ 3.676571] Key type id_resolver registered [ 3.681286] Key type id_legacy registered [ 3.685602] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 3.695165] NET: Registered protocol family 38 [ 3.700237] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 3.708583] io scheduler noop registered [ 3.713009] io scheduler deadline registered [ 3.717858] io scheduler cfq registered (default) [ 3.723745] [RTK_PWM] rtd1295_pwm_probe - hwpwm=(0) enable=(0) duty_rate=(5) clksrc_div=(1) clkout_div=(255)--- [ 3.735316] [RTK_PWM] rtd1295_pwm_probe - defualt output frequence = 26367Hz --- [ 3.743467] [RTK_PWM] rtd1295_pwm_probe - hwpwm=(1) enable=(1) duty_rate=(50) clksrc_div=(1) clkout_div=(255)--- [ 3.755130] [RTK_PWM] rtd1295_pwm_probe - defualt output frequence = 26367Hz --- [ 3.763661] [RTK_PWM] rtd1295_pwm_probe - hwpwm=(2) enable=(0) duty_rate=(50) clksrc_div=(1) clkout_div=(255)--- [ 3.775317] [RTK_PWM] rtd1295_pwm_probe - defualt output frequence = 26367Hz --- [ 3.783840] [RTK_PWM] rtd1295_pwm_probe - hwpwm=(3) enable=(0) duty_rate=(50) clksrc_div=(1) clkout_div=(255)--- [ 3.795495] [RTK_PWM] rtd1295_pwm_probe - defualt output frequence = 26367Hz --- [ 3.804750] [RTD16xx PCIE1] 98060000.pcie: PCIE host driver initial begin. [ 3.812503] [RTD16xx PCIE1] 98060000.pcie: Speed Mode: GEN2 [ 3.825384] [RTD16xx PCIE1] 98060000.pcie: PCIE device has link up in slot 1 [ 3.833326] OF: PCI: host bridge /pcie@98060000 ranges: [ 3.839219] OF: PCI: MEM 0x98062000..0x9807ffff -> 0x98062000 [ 3.845889] OF: PCI: IO 0x00030000..0x0003ffff -> 0x00030000 [ 3.852641] [RTD16xx PCIE1] 98060000.pcie: PCI host bridge to bus 0000:01 [ 3.860296] pci_bus 0000:01: root bus resource [bus 00-ff] [ 3.866478] pci_bus 0000:01: root bus resource [mem 0x98062000-0x9807ffff] [ 3.874225] pci_bus 0000:01: root bus resource [io 0x0000-0xffff] (bus address [0x30000-0x3ffff]) [ 3.886304] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid [ 3.903541] pci 0000:01:00.0: BAR 2: assigned [mem 0x98070000-0x9807ffff 64bit] [ 3.912301] pci 0000:01:00.0: BAR 4: assigned [mem 0x98064000-0x98067fff 64bit] [ 3.920699] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.927738] [RTD16xx PCIE1] 98060000.pcie: PCIE host driver initial done. [ 3.936173] [RTK MCP] MCP driver initial begin. [ 3.941302] [RTK MCP] MCP Base: 0xffffff80080bd000 [ 3.946701] [RTK MCP] TP Base: 0xffffff80080bf000 [ 3.952106] [RTK MCP] MCP driver initial done. [ 3.957430] rtk-demod 9801e000.demod: initialized [ 3.962974] rtk-tp 98014000.tp: initialized [ 3.967910] rtk-r2rdsc 9800b000.r2rdsc: initialized [ 3.974744] [I2C0] Xfer fail - TXABORT (1/2), Reason=800001 [ 3.981021] msg->addr = 41 [ 3.984166] msg->flags = 0001 [ 3.987506] msg->len = 1 [ 3.990552] msg->buf = ffffffc0796dfd80 [ 3.995070] silergy-sy8827e 0-0041: failed to read chip_id: -13 [ 4.001790] silergy-sy8827e: probe of 0-0041 failed with error -13 [ 4.008884] reg-sel 0-0012: selector_probe [ 4.014942] reg-sel 0-0012: driver=apw8889 [ 4.019569] reg-sel 0-0012: id=apw8889 [ 4.023803] reg-sel 0-0012: device_node=apw8889 [ 4.030799] reg-sel 0-0012: apw8889(5a) rev3 [ 4.042867] apw8889-regulator apw8889-regulator: initialized [ 4.049238] reg-sel 0-0012: initialized [ 4.053643] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 4.061544] console [ttyS0] disabled [ 4.065610] 98007800.serial0: ttyS0 at MMIO 0x98007800 (irq = 10, base_baud = 1687500) is a 16550A [ 4.075296] console [ttyS0] enabled [ 4.075296] console [ttyS0] enabled [ 4.082663] bootconsole [uart8250] disabled [ 4.082663] bootconsole [uart8250] disabled [ 4.092087] Unable to detect cache hierarchy for CPU 0 [ 4.101009] brd: module loaded [ 4.108289] loop: module loaded [ 4.112422] phy-rtk-sata 9803ff00.sata_phy: phy0 para 0x70000211 [ 4.118603] phy-rtk-sata 9803ff00.sata_phy: phy0 para 0x70004211 [ 4.124768] phy-rtk-sata 9803ff00.sata_phy: phy0 para 0x70008211 [ 4.130941] phy-rtk-sata 9803ff00.sata_phy: phy0 para 0x336a0511 [ 4.137106] phy-rtk-sata 9803ff00.sata_phy: phy0 para 0x336a4511 [ 4.143277] phy-rtk-sata 9803ff00.sata_phy: phy0 para 0x336a8511 [ 4.149440] phy-rtk-sata 9803ff00.sata_phy: phy0 para 0xa9040b11 [ 4.155602] phy-rtk-sata 9803ff00.sata_phy: phy0 para 0xa9044b11 [ 4.161763] phy-rtk-sata 9803ff00.sata_phy: phy0 para 0xa9048b11 [ 4.167927] phy-rtk-sata 9803ff00.sata_phy: phy0 para 0x500b1411 [ 4.174088] phy-rtk-sata 9803ff00.sata_phy: phy0 para 0x500b5411 [ 4.180249] phy-rtk-sata 9803ff00.sata_phy: phy0 para 0x500b9411 [ 4.186411] phy-rtk-sata 9803ff00.sata_phy: phy0 para 0x77771511 [ 4.192572] phy-rtk-sata 9803ff00.sata_phy: phy0 para 0x77775511 [ 4.198733] phy-rtk-sata 9803ff00.sata_phy: phy0 para 0x77779511 [ 4.204894] phy-rtk-sata 9803ff00.sata_phy: phy0 para 0x231711 [ 4.210878] phy-rtk-sata 9803ff00.sata_phy: phy0 para 0x235711 [ 4.216862] phy-rtk-sata 9803ff00.sata_phy: phy0 para 0x239711 [ 4.222845] phy-rtk-sata 9803ff00.sata_phy: phy0 para 0x632211 [ 4.228828] phy-rtk-sata 9803ff00.sata_phy: phy0 para 0x636211 [ 4.234813] phy-rtk-sata 9803ff00.sata_phy: phy0 para 0x63a211 [ 4.240797] phy-rtk-sata 9803ff00.sata_phy: phy0 para 0xab762311 [ 4.246958] phy-rtk-sata 9803ff00.sata_phy: phy0 para 0xab766311 [ 4.253119] phy-rtk-sata 9803ff00.sata_phy: phy0 para 0xab76a311 [ 4.259280] phy-rtk-sata 9803ff00.sata_phy: phy0 txdrv 0x40aa2011 [ 4.265531] phy-rtk-sata 9803ff00.sata_phy: phy0 txdrv 0x40a86011 [ 4.271781] phy-rtk-sata 9803ff00.sata_phy: phy0 txdrv 0x40a5a011 [ 4.278038] phy-rtk-sata 9803ff00.sata_phy: phy0 txdrv 0x88aa2111 [ 4.284288] phy-rtk-sata 9803ff00.sata_phy: phy0 txdrv 0x88aa6111 [ 4.290539] phy-rtk-sata 9803ff00.sata_phy: phy0 txdrv 0x38aaa111 [ 4.296790] phy-rtk-sata 9803ff00.sata_phy: phy0 rxsense 0x42100911 [ 4.303219] phy-rtk-sata 9803ff00.sata_phy: phy0 rxsense 0x42104911 [ 4.309648] phy-rtk-sata 9803ff00.sata_phy: phy0 rxsense 0x42108911 [ 4.316076] phy-rtk-sata 9803ff00.sata_phy: phy0 rxsense 0x276a0311 [ 4.322505] phy-rtk-sata 9803ff00.sata_phy: phy0 rxsense 0x276a4311 [ 4.328934] phy-rtk-sata 9803ff00.sata_phy: phy0 rxsense 0x27668311 [ 4.335394] phy-rtk-sata 9803ff00.sata_phy: init phy0 OK [ 4.340850] phy-rtk-sata 9803ff00.sata_phy: phy1 para 0x70000211 [ 4.347013] phy-rtk-sata 9803ff00.sata_phy: phy1 para 0x70004211 [ 4.353174] phy-rtk-sata 9803ff00.sata_phy: phy1 para 0x70008211 [ 4.359336] phy-rtk-sata 9803ff00.sata_phy: phy1 para 0x336a0511 [ 4.365497] phy-rtk-sata 9803ff00.sata_phy: phy1 para 0x336a4511 [ 4.371658] phy-rtk-sata 9803ff00.sata_phy: phy1 para 0x336a8511 [ 4.377819] phy-rtk-sata 9803ff00.sata_phy: phy1 para 0xa9040b11 [ 4.383980] phy-rtk-sata 9803ff00.sata_phy: phy1 para 0xa9044b11 [ 4.390141] phy-rtk-sata 9803ff00.sata_phy: phy1 para 0xa9048b11 [ 4.396302] phy-rtk-sata 9803ff00.sata_phy: phy1 para 0x500b1411 [ 4.402463] phy-rtk-sata 9803ff00.sata_phy: phy1 para 0x500b5411 [ 4.408624] phy-rtk-sata 9803ff00.sata_phy: phy1 para 0x500b9411 [ 4.414785] phy-rtk-sata 9803ff00.sata_phy: phy1 para 0x77771511 [ 4.420946] phy-rtk-sata 9803ff00.sata_phy: phy1 para 0x77775511 [ 4.427107] phy-rtk-sata 9803ff00.sata_phy: phy1 para 0x77779511 [ 4.433267] phy-rtk-sata 9803ff00.sata_phy: phy1 para 0x231711 [ 4.439250] phy-rtk-sata 9803ff00.sata_phy: phy1 para 0x235711 [ 4.445233] phy-rtk-sata 9803ff00.sata_phy: phy1 para 0x239711 [ 4.451218] phy-rtk-sata 9803ff00.sata_phy: phy1 para 0x632211 [ 4.457201] phy-rtk-sata 9803ff00.sata_phy: phy1 para 0x636211 [ 4.463184] phy-rtk-sata 9803ff00.sata_phy: phy1 para 0x63a211 [ 4.469167] phy-rtk-sata 9803ff00.sata_phy: phy1 para 0xab762311 [ 4.475329] phy-rtk-sata 9803ff00.sata_phy: phy1 para 0xab766311 [ 4.481490] phy-rtk-sata 9803ff00.sata_phy: phy1 para 0xab76a311 [ 4.487653] phy-rtk-sata 9803ff00.sata_phy: phy1 txdrv 0x40a52011 [ 4.493905] phy-rtk-sata 9803ff00.sata_phy: phy1 txdrv 0x40a46011 [ 4.500156] phy-rtk-sata 9803ff00.sata_phy: phy1 txdrv 0x40a5a011 [ 4.506406] phy-rtk-sata 9803ff00.sata_phy: phy1 txdrv 0x484a2111 [ 4.512658] phy-rtk-sata 9803ff00.sata_phy: phy1 txdrv 0x484a6111 [ 4.518910] phy-rtk-sata 9803ff00.sata_phy: phy1 txdrv 0xa8aaa111 [ 4.525161] phy-rtk-sata 9803ff00.sata_phy: phy1 rxsense 0x42100911 [ 4.531599] phy-rtk-sata 9803ff00.sata_phy: phy1 rxsense 0x42104911 [ 4.538035] phy-rtk-sata 9803ff00.sata_phy: phy1 rxsense 0x42108911 [ 4.544466] phy-rtk-sata 9803ff00.sata_phy: phy1 rxsense 0x276a0311 [ 4.550895] phy-rtk-sata 9803ff00.sata_phy: phy1 rxsense 0x276a4311 [ 4.557325] phy-rtk-sata 9803ff00.sata_phy: phy1 rxsense 0x27668311 [ 4.563786] phy-rtk-sata 9803ff00.sata_phy: init phy1 OK [ 4.569338] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 4.577264] r8125 2.5Gigabit Ethernet driver 9.003.rc7+1-NAPI loaded [ 4.584017] r8125 0000:01:00.0: enabling device (0000 -> 0003) [ 4.591865] r8125 0000:01:00.0: no MSI. Back to INTx. [ 4.949582] r8125: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 4.963289] r8125 Copyright (C) 2019 Realtek NIC software team <[email protected]> [ 4.963289] This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>. [ 4.963289] This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>. [ 4.995113] r8169 Gigabit Ethernet driver 2.6.0LK-NAPI loaded [ 5.001088] get phy_irq from device tree: 220, 221, 222 [ 5.007546] wait all ACP access finished...[ 5.011667] done. [ 5.013642] ARM ACP off .[ 5.042296] wait 24 ms for PHY interrupt. UMSK_ISR = 0x18181000 [ 5.050070] wait 1 ms for PHY ready, current = 0x23 [ 5.059944] wait 1 ms for GPHY patch_rdy. reg = 0xc0 [ 5.065037] patch_rdy is asserted!! [ 5.068997] check patch key = 5600 [ 5.085944] wait 0 ms for GPHY patch_rdy. reg = 0x80 [ 5.091037] [ 5.091037] patch_rdy is de-asserted!! [ 5.096397] GPHY uC code patched. [ 5.114749] r8169 98016000.gmac eth1: RTL8168g/8111g at 0xffffff8008137000, XID 10900800 IRQ 11 [ 5.123675] r8169 98016000.gmac eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 5.132608] [Ethernet] Watch link status change. [ 5.132616] eth1: request eth_phy0 IRQ 220 successfully, ret = 0x0 [ 5.132627] eth1: request eth_phy1 IRQ 221 successfully, ret = 0x0 [ 5.132637] eth1: request eth_phy2 IRQ 222 successfully, ret = 0x0 [ 5.132991] rtk-uio 98000000.rbus: initialized [ 5.133165] rtk-uio 9801b000.refclk: initialized [ 5.133454] rtk-se 9800c000.se: irq=22 [ 5.133461] rtk-se 9800c000.se: phys:0x000000009800c000 virt:0xffffff800813b000 size:0x0000000000001000 type:1 name:SE reg space [ 5.133466] rtk-se 9800c000.se: phys:0x000000007e041000 virt:0xffffff800813d000 size:0x0000000000001000 type:1 name:SE driver data [ 5.133472] rtk-se 9800c000.se: phys:0x000000007e044000 virt:0xffffff800813f000 size:0x0000000000004000 type:1 name:SE command queue [ 5.133671] rtk-se 9800c000.se: [SE] Engine[0] Ctrl:00000001 Base:7e044000 ReadPtr:7e044000 WritePtr:7e044000 Limit:7e048000 [ 5.133676] rtk-se 9800c000.se: shared mode [ 5.133680] rtk-se 9800c000.se: initialized [ 5.133902] rtk-md 9800b000.md: irq=21 [ 5.133909] rtk-md 9800b000.md: phys:0x000000009800b000 virt:0xffffff8008144000 size:0x0000000000001000 type:1 name:MD reg space [ 5.133914] rtk-md 9800b000.md: phys:0x000000007e042000 virt:0xffffff8008146000 size:0x0000000000001000 type:1 name:MD driver data [ 5.133919] rtk-md 9800b000.md: phys:0x000000007e048000 virt:0xffffff8008148000 size:0x0000000000004000 type:1 name:MD command queue [ 5.134143] rtk-md 9800b000.md: [MD] Engine[0] Ctrl:00000005 Base:7e048000 ReadPtr:7e048000 WritePtr:7e048000 Limit:7e04c000 [ 5.134147] rtk-md 9800b000.md: shared mode [ 5.134151] rtk-md 9800b000.md: initialized [ 5.134437] rtk-usb2phy 98028280.dwc3_drd_usb2phy: rtk_usb2phy_probe: Chip 1619 revision is a01 [ 5.134483] rtk-usb2phy 98028280.dwc3_drd_usb2phy: /build/F0024_buffalonas_kernel_src/drivers/usb/phy/phy-rtk-usb2.c Probe RTK USB 2.0 PHY [ 5.134521] rtk-usb2phy 98031280.dwc3_u2host_usb2phy: rtk_usb2phy_probe: Chip 1619 revision is a01 [ 5.134562] rtk-usb2phy 98031280.dwc3_u2host_usb2phy: /build/F0024_buffalonas_kernel_src/drivers/usb/phy/phy-rtk-usb2.c Probe RTK USB 2.0 PHY [ 5.134597] rtk-usb2phy 98058280.dwc3_u3host_usb2phy: rtk_usb2phy_probe: Chip 1619 revision is a01 [ 5.134634] rtk-usb2phy 98058280.dwc3_u3host_usb2phy: /build/F0024_buffalonas_kernel_src/drivers/usb/phy/phy-rtk-usb2.c Probe RTK USB 2.0 PHY [ 5.134782] rtk-usb3phy 98013210.dwc3_drd_usb3phy: rtk_usb3phy_probe: Chip 1619 revision is a01 [ 5.134798] rtk-usb3phy 98013210.dwc3_drd_usb3phy: rtk_usb3phy_probe load phy_data_revA parameter [ 5.134816] rtk-usb3phy 98013210.dwc3_drd_usb3phy: /build/F0024_buffalonas_kernel_src/drivers/usb/phy/phy-rtk-usb3.c Probe RTK USB 3.0 PHY [ 5.134851] rtk-usb3phy 98013e10.dwc3_u3host_usb3phy: rtk_usb3phy_probe: Chip 1619 revision is a01 [ 5.134869] rtk-usb3phy 98013e10.dwc3_u3host_usb3phy: rtk_usb3phy_probe load phy_data_revA parameter [ 5.134890] rtk-usb3phy 98013e10.dwc3_u3host_usb3phy: /build/F0024_buffalonas_kernel_src/drivers/usb/phy/phy-rtk-usb3.c Probe RTK USB 3.0 PHY [ 5.135296] rtk-dwc3 98013200.rtk_dwc3_drd: Probe Realtek-SoC USB DWC3 Host Controller [ 5.135562] rtk-usb-manager 98000000.rtk_usb_power_manager: rtk_usb_manager_schedule_work for 98013200.rtk_dwc3_drd [ 5.135579] rtk-dwc3 98013200.rtk_dwc3_drd: dwc3_rtk_probe ok! (take 0 ms) [ 5.135586] rtk-dwc3 98013200.rtk_dwc3_drd: dwc3_rtk_probe_work Start ... [ 5.135611] rtk-dwc3 98013c00.rtk_dwc3_u2host: Probe Realtek-SoC USB DWC3 Host Controller [ 5.135857] rtk-usb-manager 98000000.rtk_usb_power_manager: rtk_usb_manager_schedule_work for 98013c00.rtk_dwc3_u2host [ 5.135860] dwc3 98020000.dwc3_drd: rtk dwc3 fixed dwc3 globals register start address 0xffffff8008178100 [ 5.135870] rtk-dwc3 98013c00.rtk_dwc3_u2host: dwc3_rtk_probe ok! (take 0 ms) [ 5.135922] rtk-dwc3 98013e00.rtk_dwc3_u3host: Probe Realtek-SoC USB DWC3 Host Controller [ 5.136036] rtk-usb2phy 98028280.dwc3_drd_usb2phy: rtk_usb2_phy_init Init RTK USB 2.0 PHY [ 5.136041] rtk-usb2phy 98028280.dwc3_drd_usb2phy: do_rtk_usb2_phy_init Init RTK USB 2.0 PHY phy#0 [ 5.136076] rtk-usb2phy 98028280.dwc3_drd_usb2phy: do_rtk_usb2_phy_toggle ########## to toggle Page1 addr 0xe0 BIT(2) [ 5.136170] rtk-usb-manager 98000000.rtk_usb_power_manager: rtk_usb_manager_schedule_work for 98013e00.rtk_dwc3_u3host [ 5.136183] rtk-dwc3 98013e00.rtk_dwc3_u3host: dwc3_rtk_probe ok! (take 0 ms) [ 5.136615] usbcore: registered new interface driver uas [ 5.136650] usbcore: registered new interface driver usb-storage [ 5.136676] usbcore: registered new interface driver ums-realtek [ 5.136757] [RTK_RTC] 9801b600.rtc: rtk_base_year = 2018 [ 5.136903] [RTK_RTC] 9801b600.rtc: rtk_rtc rtcacr = 0x80 [ 5.136908] [RTK_RTC] 9801b600.rtc: rtk_rtc already enabled [ 5.136914] [RTK_RTC] 9801b600.rtc: enable REG_SEC = 0x29 [ 5.136918] [RTK_RTC] 9801b600.rtc: enable REG_MIN = 0x2 [ 5.136921] [RTK_RTC] 9801b600.rtc: enable REG_HR = 0x0 [ 5.136924] [RTK_RTC] 9801b600.rtc: enable REG_DATA_LOW = 0x0 [ 5.136928] [RTK_RTC] 9801b600.rtc: enable REG_DATE_HIGH = 0x0 [ 5.137087] rtk-usb2phy 98028280.dwc3_drd_usb2phy: do_rtk_usb2_phy_toggle disconnect to set Page0 0xE7 = f1 [ 5.137091] rtk-usb2phy 98028280.dwc3_drd_usb2phy: rtk_usb2_phy_init Initialized RTK USB 2.0 PHY (take 0ms) [ 5.137095] rtk-usb3phy 98013210.dwc3_drd_usb3phy: rtk_usb_phy_init Init RTK USB 3.0 PHY [ 5.137099] rtk-usb3phy 98013210.dwc3_drd_usb3phy: do_rtk_usb_phy_init Init RTK USB 3.0 PHY phy#0 [ 5.137108] [RTK_RTC] 9801b600.rtc: rtc core: registered rtc as rtc0 [ 5.137112] [RTK_RTC] 9801b600.rtc: initialized [ 5.137164] i2c /dev entries driver [ 5.142930] rtk-usb3phy 98013210.dwc3_drd_usb3phy: do_rtk_usb3_phy_toggle ########## to toggle PHY addr 0x09 BIT(9) [ 5.144237] rtk-usb3phy 98013210.dwc3_drd_usb3phy: do_rtk_usb3_phy_toggle ########## PHY addr 0x1f = 0xa8741f10 [ 5.144241] rtk-usb3phy 98013210.dwc3_drd_usb3phy: rtk_usb_phy_init Initialized RTK USB 3.0 PHY (take 8ms) [ 5.144269] dwc3 98020000.dwc3_drd: dwc3_host_init [ 5.144391] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller [ 5.144405] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 1 [ 5.144626] xhci-hcd xhci-hcd.6.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00010010 [ 5.144660] xhci-hcd xhci-hcd.6.auto: irq 27, io mem 0x98020000 [ 5.145148] hub 1-0:1.0: USB hub found [ 5.145169] hub 1-0:1.0: 1 port detected [ 5.145398] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller [ 5.145408] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 2 [ 5.145460] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.145842] hub 2-0:1.0: USB hub found [ 5.145862] hub 2-0:1.0: 1 port detected [ 5.146237] rtk-usb-manager 98000000.rtk_usb_power_manager: rtk_usb_init_port_power_on for 98013200.rtk_dwc3_drd [ 5.146244] rtk-usb-manager 98000000.rtk_usb_power_manager: __usb_port_power_on_off port0 power=on enable=0x1 enable_mask=0x1 [ 5.146268] rtk-usb-manager 98000000.rtk_usb_power_manager: __gpio_on_off to set power on by gpio (id=57) OK [ 5.146276] rtk-dwc3 98013200.rtk_dwc3_drd: dwc3_rtk_probe_work End ... ok! (take 8 ms) [ 5.146284] rtk-dwc3 98013c00.rtk_dwc3_u2host: dwc3_rtk_probe_work Start ... [ 5.146467] dwc3 98029000.dwc3_u2host: rtk dwc3 fixed dwc3 globals register start address 0xffffff80081a8100 [ 5.146590] rtk-usb2phy 98031280.dwc3_u2host_usb2phy: rtk_usb2_phy_init Init RTK USB 2.0 PHY [ 5.146595] rtk-usb2phy 98031280.dwc3_u2host_usb2phy: do_rtk_usb2_phy_init Init RTK USB 2.0 PHY phy#0 [ 5.146630] rtk-usb2phy 98031280.dwc3_u2host_usb2phy: do_rtk_usb2_phy_toggle ########## to toggle Page1 addr 0xe0 BIT(2) [ 5.147641] rtk-usb2phy 98031280.dwc3_u2host_usb2phy: do_rtk_usb2_phy_toggle disconnect to set Page0 0xE7 = f1 [ 5.147645] rtk-usb2phy 98031280.dwc3_u2host_usb2phy: rtk_usb2_phy_init Initialized RTK USB 2.0 PHY (take 0ms) [ 5.147670] dwc3 98029000.dwc3_u2host: dwc3_host_init [ 5.147781] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller [ 5.147793] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 3 [ 5.147985] xhci-hcd xhci-hcd.7.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00010010 [ 5.148000] xhci-hcd xhci-hcd.7.auto: irq 27, io mem 0x98029000 [ 5.148449] hub 3-0:1.0: USB hub found [ 5.148468] hub 3-0:1.0: 1 port detected [ 5.148644] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller [ 5.148654] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 4 [ 5.148698] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.149071] hub 4-0:1.0: USB hub found [ 5.149090] hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 5.149360] rtk-usb-manager 98000000.rtk_usb_power_manager: rtk_usb_init_port_power_on for 98013c00.rtk_dwc3_u2host [ 5.149367] rtk-usb-manager 98000000.rtk_usb_power_manager: __usb_port_power_on_off port1 power=on enable=0x1 enable_mask=0x1 [ 5.149390] rtk-usb-manager 98000000.rtk_usb_power_manager: __gpio_on_off to set power (power_low_active) on by gpio (id=48) OK [ 5.149398] rtk-dwc3 98013c00.rtk_dwc3_u2host: dwc3_rtk_probe_work End ... ok! (take 4 ms) [ 5.149405] rtk-dwc3 98013e00.rtk_dwc3_u3host: dwc3_rtk_probe_work Start ... [ 5.149581] dwc3 98050000.dwc3_u3host: rtk dwc3 fixed dwc3 globals register start address 0xffffff80081c8100 [ 5.149721] rtk-usb2phy 98058280.dwc3_u3host_usb2phy: rtk_usb2_phy_init Init RTK USB 2.0 PHY [ 5.149726] rtk-usb2phy 98058280.dwc3_u3host_usb2phy: do_rtk_usb2_phy_init Init RTK USB 2.0 PHY phy#0 [ 5.149761] rtk-usb2phy 98058280.dwc3_u3host_usb2phy: do_rtk_usb2_phy_toggle ########## to toggle Page1 addr 0xe0 BIT(2) [ 5.150773] rtk-usb2phy 98058280.dwc3_u3host_usb2phy: do_rtk_usb2_phy_toggle disconnect to set Page0 0xE7 = f1 [ 5.150777] rtk-usb2phy 98058280.dwc3_u3host_usb2phy: rtk_usb2_phy_init Initialized RTK USB 2.0 PHY (take 4ms) [ 5.150782] rtk-usb3phy 98013e10.dwc3_u3host_usb3phy: rtk_usb_phy_init Init RTK USB 3.0 PHY [ 5.150786] rtk-usb3phy 98013e10.dwc3_u3host_usb3phy: do_rtk_usb_phy_init Init RTK USB 3.0 PHY phy#0 [ 5.156617] rtk-usb3phy 98013e10.dwc3_u3host_usb3phy: do_rtk_usb3_phy_toggle ########## to toggle PHY addr 0x09 BIT(9) [ 5.157924] rtk-usb3phy 98013e10.dwc3_u3host_usb3phy: do_rtk_usb3_phy_toggle ########## PHY addr 0x1f = 0xa0001f10 [ 5.157928] rtk-usb3phy 98013e10.dwc3_u3host_usb3phy: rtk_usb_phy_init Initialized RTK USB 3.0 PHY (take 4ms) [ 5.157956] dwc3 98050000.dwc3_u3host: dwc3_host_init [ 5.158066] rtk-thermal-sensor 9801db00.thermal-sensor: initialized [ 5.158088] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller [ 5.158107] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 5 [ 5.158283] md: linear personality registered for level -1 [ 5.158286] md: raid0 personality registered for level 0 [ 5.158289] md: raid1 personality registered for level 1 [ 5.158291] md: raid10 personality registered for level 10 [ 5.158328] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00010010 [ 5.158346] xhci-hcd xhci-hcd.8.auto: irq 27, io mem 0x98050000 [ 5.158430] md: raid6 personality registered for level 6 [ 5.158432] md: raid5 personality registered for level 5 [ 5.158434] md: raid4 personality registered for level 4 [ 5.158437] md: multipath personality registered for level -4 [ 5.158810] hub 5-0:1.0: USB hub found [ 5.158830] hub 5-0:1.0: 1 port detected [ 5.159006] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller [ 5.159015] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 6 [ 5.159075] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.159444] hub 6-0:1.0: USB hub found [ 5.159462] hub 6-0:1.0: 1 port detected [ 5.159793] rtk-usb-manager 98000000.rtk_usb_power_manager: rtk_usb_init_port_power_on for 98013e00.rtk_dwc3_u3host [ 5.159801] rtk-usb-manager 98000000.rtk_usb_power_manager: __usb_port_power_on_off port2 power=on enable=0x1 enable_mask=0x1 [ 5.159823] rtk-usb-manager 98000000.rtk_usb_power_manager: __gpio_on_off to set power (power_low_active) on by gpio (id=49) OK [ 5.159831] rtk-dwc3 98013e00.rtk_dwc3_u3host: dwc3_rtk_probe_work End ... ok! (take 12 ms) [ 5.161072] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: [email protected] [ 5.161481] EMMC : emmc of_node found [ 5.161550] [rtkemmc_probe] get speed-step : 3 [ 5.161557] [rtkemmc_probe] get driving s3 : 0x1 [ 5.161559] [rtkemmc_probe] get driving s3 : 0x4 [ 5.161560] [rtkemmc_probe] get driving s3 : 0x4 [ 5.161562] [rtkemmc_probe] get driving s3 : 0x4 [ 5.161564] [rtkemmc_probe] get driving s3 : 0x0 [ 5.161566] [rtkemmc_probe] get tx tuning switch : 0 [ 5.161568] [rtkemmc_probe] get rx tuning switch : 1 [ 5.161570] [rtkemmc_probe] get dqs tuning switch : 1 [ 5.161573] [rtkemmc_probe] get User defined tx reference phase: 9 [ 5.161576] [rtkemmc_probe] MBR format: emmc tuning offset start from 0x9a0e00 [ 5.161576] [ 5.161671] EMMC: set to 0x00000000, EMMC_CTYPE=00000000 [ 5.161677] EMMC: set_wrapper_div to 0x00000000 [ 5.161680] EMMC, set_ip_div = cur_div(0x00000080), ignored. [ 5.161899] EMMC: set_freq to 0x46, EMMC_CKGEN_CTL=0x00000000, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00464388, PLL_EMMC4=00000007 [ 5.161979] EMMC: set_freq to 0x46, EMMC_CKGEN_CTL=0x00000000, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00464388, PLL_EMMC4=00000007 [ 5.161982] EMMC, set_ip_div = cur_div(0x00000080), ignored. [ 5.178147] EMMC: set_freq to 0x46, EMMC_CKGEN_CTL=0x00000000, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00464388, PLL_EMMC4=00000007 [ 5.178149] EMMC, set_ip_div = cur_div(0x00000080), ignored. [ 5.198070] mmc0: EMMC driver initialized [ 5.198090] EMMC: set_freq to 0x46, EMMC_CKGEN_CTL=0x00000000, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00464388, PLL_EMMC4=00000007 [ 5.198092] EMMC, set_ip_div = cur_div(0x00000080), ignored. [ 5.201026] EMMC: set_freq to 0x46, EMMC_CKGEN_CTL=0x00000000, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00464388, PLL_EMMC4=00000007 [ 5.201029] EMMC, set_ip_div = cur_div(0x00000080), ignored. [ 5.202048] EMMC: set_freq to 0x46, EMMC_CKGEN_CTL=0x00000000, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00464388, PLL_EMMC4=00000007 [ 5.202051] EMMC, set_ip_div = cur_div(0x00000080), ignored. [ 5.207151] EMMC: set_freq to 0x46, EMMC_CKGEN_CTL=0x00000000, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00464388, PLL_EMMC4=00000007 [ 5.207154] EMMC, set_ip_div = cur_div(0x00000080), ignored. [ 5.207164] EMMC: set_freq to 0x46, EMMC_CKGEN_CTL=0x00000000, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00464388, PLL_EMMC4=00000007 [ 5.207166] EMMC, set_ip_div = cur_div(0x00000080), ignored. [ 5.209389] EMMC: set_freq to 0x46, EMMC_CKGEN_CTL=0x00000000, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00464388, PLL_EMMC4=00000007 [ 5.209392] EMMC, set_ip_div = cur_div(0x00000080), ignored. [ 5.217253] EMMC: set_freq to 0x46, EMMC_CKGEN_CTL=0x00000000, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00464388, PLL_EMMC4=00000007 [ 5.217256] EMMC, set_ip_div = cur_div(0x00000080), ignored. [ 5.217943] rtkemmc_set_rspparam : cmd7 arg : 0x00010000 [ 5.217945] rtkemmc_set_rspparam : cmd7 with rsp [ 5.232755] before cmd8, read dqs_data from emmc first for later usage: hs400_header=0x33aa, hs400_TX=0x9, hs400_RX=0x8, hs400_dqs=0x28 [ 5.232757] tx_user_defined has been set, we still use user define value for usage [ 5.246096] xhci-hcd xhci-hcd.6.auto: RTK_phy_toggle to call RTK_dwc3_usb2_phy_toggle (wValue=10 port=0 status=202a0) [ 5.246105] rtk-usb2phy 98028280.dwc3_drd_usb2phy: do_rtk_usb2_phy_toggle ########## to toggle Page1 addr 0xe0 BIT(2) [ 5.247115] rtk-usb2phy 98028280.dwc3_drd_usb2phy: do_rtk_usb2_phy_toggle disconnect to set Page0 0xE7 = f1 [ 5.254375] card->mmc_avail_type = 0x00000057 [ 5.255188] EMMC: set_freq to 0x46, EMMC_CKGEN_CTL=0x00000000, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00464388, PLL_EMMC4=00000007 [ 5.255190] EMMC, set_ip_div = cur_div(0x00000080), ignored. [ 5.255191] set bus width 8 [ 5.255195] EMMC: set to 0x00010000, EMMC_CTYPE=00010000 [ 5.262086] xhci-hcd xhci-hcd.8.auto: RTK_phy_toggle to call RTK_dwc3_usb2_phy_toggle (wValue=10 port=0 status=202a0) [ 5.262093] rtk-usb2phy 98058280.dwc3_u3host_usb2phy: do_rtk_usb2_phy_toggle ########## to toggle Page1 addr 0xe0 BIT(2) [ 5.263103] rtk-usb2phy 98058280.dwc3_u3host_usb2phy: do_rtk_usb2_phy_toggle disconnect to set Page0 0xE7 = f1 [ 5.266197] EMMC: set_freq to 0xa6, EMMC_CKGEN_CTL=0x00000000, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00a64388, PLL_EMMC4=00000007 [ 5.266205] EMMC: set div to 0x00, EMMC_CLKDIV=00000000 [ 5.266206] set bus width 8 [ 5.266209] EMMC: set to 0x00010000, EMMC_CTYPE=00010000 [ 5.266220] EMMC: set_freq to 0xa6, EMMC_CKGEN_CTL=0x00000000, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00a64388, PLL_EMMC4=00000007 [ 5.266222] EMMC, set_ip_div = cur_div(0x00000000), ignored. [ 5.266223] set bus width 8 [ 5.266226] EMMC: set to 0x00010000, EMMC_CTYPE=00010000 [ 5.266228] Prepare HS400 mode... [ 5.266230] emmc card manid = 0x00000070 [ 5.266232] EMMC: set_wrapper_div to 0x00000000 [ 5.266242] EMMC: set_freq to 0x70, EMMC_CKGEN_CTL=0x00000000, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00704388, PLL_EMMC4=00000007 [ 5.266244] EMMC, set_ip_div = cur_div(0x00000000), ignored. [ 5.266456] Inherit bootcode tuning phase: TX=0x9, RX=0x8 [ 5.276460] HS400 first stage: final phase=0x84b [ 5.276471] EMMC: set_freq to 0x57, EMMC_CKGEN_CTL=0x00000000, PLL_EMMC1=0000084b, PLL_EMMC2=04517893, PLL_EMMC3=00574388, PLL_EMMC4=00000007 [ 5.276478] EMMC: set div to 0x01, EMMC_CLKDIV=00000001 [ 5.276479] set bus width 8 [ 5.276482] EMMC: set to 0x00010000, EMMC_CTYPE=00010000 [ 5.276492] EMMC: set_freq to 0x57, EMMC_CKGEN_CTL=0x00000000, PLL_EMMC1=0000084b, PLL_EMMC2=04517893, PLL_EMMC3=00574388, PLL_EMMC4=00000007 [ 5.276493] EMMC, set_ip_div = cur_div(0x00000001), ignored. [ 5.276494] set bus width 8 [ 5.276497] EMMC: set to 0x00010000, EMMC_CTYPE=00010000 [ 5.276624] mmc_select_hs400: card->ext_csd.raw_driver_strength=1f [ 5.277322] EMMC: set_freq to 0x57, EMMC_CKGEN_CTL=0x00000000, PLL_EMMC1=0000084b, PLL_EMMC2=04517893, PLL_EMMC3=00574388, PLL_EMMC4=00000007 [ 5.277324] EMMC, set_ip_div = cur_div(0x00000001), ignored. [ 5.277325] set bus width 8 [ 5.277328] EMMC: set to 0x00010000, EMMC_CTYPE=00010000 [ 5.277339] EMMC: set_freq to 0x70, EMMC_CKGEN_CTL=0x00000000, PLL_EMMC1=0000084b, PLL_EMMC2=04517893, PLL_EMMC3=00704388, PLL_EMMC4=00000007 [ 5.277345] EMMC: set div to 0x00, EMMC_CLKDIV=00000000 [ 5.277348] rtkemmc_set_ios - enable HS400, DDR_REG:0x80000000 [ 5.277349] set bus width 8 [ 5.277352] EMMC: set to 0x00010000, EMMC_CTYPE=00010000 [ 5.279361] Inherit bootcode dqs: DQS=0x28 [ 5.279363] read/write test for inherit hs400 parameter... [ 5.302050] read/write test success for hs400 parameter!!! [ 5.307568] mmc0: new HS400 MMC card at address 0001 [ 5.308045] mmcblk0: mmc0:0001 M62704 3.53 GiB [ 5.308283] mmcblk0boot0: mmc0:0001 M62704 partition 1 2.00 MiB [ 5.308509] mmcblk0boot1: mmc0:0001 M62704 partition 2 2.00 MiB [ 5.308725] mmcblk0rpmb: mmc0:0001 M62704 partition 3 512 KiB [ 5.317818] mmcblk0: p1 p2 p3 p4 p5 p6 [ 5.326066] mmc0: retry_left=43, block_dev=[16 -> 26], time=126ms [ 5.326482] rtk-sdmmc: build at : #1 SMP PREEMPT Tue Oct 27 10:22:47 UTC 2020 [ 5.326484] rtk-sdmmc: CONFIG_MMC_BLOCK_BOUNCE enable [ 5.333787] SD CD irq=259 [ 5.333789] SD WP irq=258 [ 5.378085] rtk_sdmmc_get_cd: SD card does not exist, card_exist = 0xfe13bf0c [ 5.382836] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 5.383916] pktgen: Packet Generator for packet performance testing. Version: 2.75 [ 5.389106] SD card does not exist and sd clk is disabled... [ 5.422421] NET: Registered protocol family 10 [ 5.440199] NET: Registered protocol family 17 [ 5.440249] 8021q: 802.1Q VLAN Support v1.8 [ 5.440271] Key type dns_resolver registered [ 5.447120] Registered cp15_barrier emulation handler [ 5.447129] Registered setend emulation handler [ 5.447556] registered taskstats version 1 [ 5.450643] scpu wrappee irq 12, scpu_wrap_addr 0xffffff800827b000 [ 5.450643] [ 5.450681] [SCPU_WRAPPER] initialized [ 5.450683] [SCPU_WRAPPER][scpu_wrapper_init] memory monitor 0x98013b00 - 0x98013c00 [ 5.451021] rtk-uctrl rtk-uctrl.0: initialized [ 5.455523] [RTK_RTC] 9801b600.rtc: setting system clock to 2018-01-01 00:02:21 UTC (1514764941) [ 5.456053] clk_mmio_gate_disable_unused: sc1 [ 5.456062] clk_mmio_gate_disable_unused: nf [ 5.456065] clk_mmio_gate_disable_unused: rsa [ 5.456073] pll_dif: clk_pll_dif_disable_unused [ 5.456106] pctrl_hdmirx: rtk_sram_power_off_unused [ 5.456113] pctrl_ve3: rtk_sram_power_off_unused [ 5.456116] pctrl_ve2: rtk_sram_power_off_unused [ 5.456118] pctrl_ve1: rtk_sram_power_off_unused [ 5.456128] ALSA device list: [ 5.456130] No soundcards found. [ 7.086709] ttyS0 - failed to request DMA [ 7.093898] Freeing unused kernel memory: 3392K Loading, please wait... starting version 237 [ 8.010193] ahci_rtk 9803f000.sata: masking port_map 0x3 -> 0x3 [ 8.016665] ahci_rtk 9803f000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode [ 8.027397] ahci_rtk 9803f000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc apst [ 8.061716] scsi host0: ahci_rtk [ 8.074893] scsi host1: ahci_rtk [ 8.078543] ata1: SATA max UDMA/133 mmio [mem 0x9803f000-0x9803ffff] port 0x100 irq 28 [ 8.089663] ata2: SATA max UDMA/133 mmio [mem 0x9803f000-0x9803ffff] port 0x180 irq 28 [ 8.306127] phy-rtk-sata 9803ff00.sata_phy: power on phy0 [ 8.311887] phy-rtk-sata 9803ff00.sata_phy: power on phy1 [ 8.416782] ata1: SATA link down (SStatus 0 SControl 300) [ 8.422430] ata2: SATA link down (SStatus 0 SControl 300) Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/nfs-top ... done. Begin: Running /scripts/nfs-premount ... done. Begin: Entering buffalo boot script ... Begin: Entering buffaloinit ... 0 /proc/sys/kernel/printk waiting for NVRAM device ... OK libsys: PID=0x0000002F by dumpnf /usr/local/sbin/hwaccess.sh: line 862: /etc/nas_feature: No such file or directory libsys: nas_feature : using /root/.nas_features/US/0x0000002F GPIO pin 72 open! GPIO pin 78 open! [ 10.093902] random: fast init done #[miconapl.boot_flash_ok; ] ====== Entering initramfs(/scripts/buffaloinit) ====== libbuffalo: /dev/disk1 not found (disconnected?) CANDIDATE_NUM=0 : CANDIDATE_LIST= Selecting disk with not considering signature CANDIDATE_NUM=0 : CANDIDATE_LIST= DISK= #[miconapl.boot_start; ] libsys: PID=0x0000002F by dumpnf libsys: nas_feature : using /root/.nas_features/US/0x0000002F Checking the existance of micon ... #[miconapl.mcon_get_version; ] TS-M LS700 nomicon ver.2.11 libsys: PID=0x0000002F by dumpnf perl: warning: Setting locale fa[ 11.001370] random: fw_ver_cmp.pl: uninitialized urandom read (4 bytes read) iled. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "C.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). libsys: /dev/rtc was updated : /dev/rtc 253 0 2018-01-01 09:02:26.978869+0900 Mon Jan 1 09:02:28 JST 2018 libsys: PID=0x0000002F by dumpnf #[miconapl.fan_set_speed; ] #[miconapl.led_set_on_off; ] Create /var/tmp/devlink from /dev/disk? earlycon console BOOTVER root ramdisk_size initrd init boot boot_device_type ubootenv ubootenv_redund -- CopyFromSfsToInitramfs -- CopyFromSfsToInitramfs: copy 'usr/bin/pgrep' from rootfs image CopyFromSfsToInitramfs: copy 'usr/sbin/memtester' from rootfs image CopyFromSfsToInitramfs: 'usr/sbin/memtester' depends on '/lib/aarch64-linux-gnu/libc.so.6' CopyFromSfsToInitramfs: 'usr/sbin/memtester' depends on '/lib/ld-linux-aarch64.so.1' CopyFromSfsToInitramfs: copy 'usr/local/bin/agingtest.sh' from rootfs image CopyFromSfsToInitramfs: copy 'usr/local/bin/agingtest_sub.sh' from rootfs image CopyFromSfsToInitramfs: copy 'usr/sbin/xfs_quota' from rootfs image CopyFromSfsToInitramfs: copy 'usr/sbin/smartctl' from rootfs image CopyFromSfsToInitramfs: copy 'etc/raidkeeper.conf' from rootfs image linuxrc:choose operation (timeout 4[s]) 1:RamRoot 2:NfsRoot 3:sda1 4:sda2 n:NandRoot h:HddRoot other:HddRoot ? -HddRoot- SUPPORT_ENCLOSURE is not 1 -- rebuild mdadm.conf for BOOT, ROOTFS with Intelligent routine -- GPIO pin 67 open! GPIO pin 41 open! checkDiskStatus : disk1 unplugged checkDiskLinkSpeed : disk1 unplugged checkDiskPerformance : disk1 unplugged libmd: GetMdBaseDisk : Selected 0 mdadm: cannot open /dev/disk?_1: No such file or directory mdadm: cannot open /dev/disk?_2: No such file or directory mdadm: cannot open /dev/disk?_5: No such file or directory mdadm: No devices listed in conf file were found. -- setup max error counts -- skip md0 (not found in /sys/block) skip md1 (not found in /sys/block) skip md2 (not found in /sys/block) dev.raid.speed_limit_max = 500000 Starting :fsck_disk1(md0) ... [Failed. ] fsck_disk1: fsck.ext4 /dev/md0 returns 8. Starting :fsck_disk1(md1) ... [Failed. ] fsck_disk1: fsck.ext4 /dev/md1 returns 8. Starting :mount(boot) ... [Failed. ] Starting :mount(boot) ... [Failed. ] enclosure_all_disks_are_not_mine: disk1 is unplugged or blank disk (ignored) All disk_signature are different from NAS enclosure. enclosure_all_disks_are_not_mine: not mine cannot get disk_signature from /dev/disk1 mount: mounting /dev/md1 on /mnt failed: No such file or directory /scripts/buffaloinit: line 1593: [: too many arguments CompareFirmware ... done. -- TestRootfs -- mount: mounting /dev/md1 on /mnt failed: No such file or directory mount: mounting /dev/md1 on /mnt failed: No such file or directory Failed to mount root partition /dev/md1 -RamdiskRoot- * Starting fanctld ... [ ok ] --- rcStart (initrd) --- Cannot get device ring settings: Operation not supported Cannot get device ring settings: Operation not supported Cannot get device ring settings: Operation not supported Cannot get device ring settings: Operation not supported === checkroot.sh === Create /var/tmp/devlink from /dev/disk? create dir : /var/cache/man create dir : /var/spool/lpd create dir : /var/mail create dir : /var/spool/news create dir : /var/spool/uucp create dir : /var/www create dir : /var/backups create dir : /var/list create dir : /var/run/ircd create dir : /var/lib/gnats create dir : /var/run/sshd create dir : /home/ntp create dir : /var/run/dbus create dir : /var/lib/avahi-autoipd create dir : /var/run/lldpd create dir : /run/proftpd create dir : /var/lib/snmp create dir : /var/run/avahi-daemon create dir : /var/lib/puppet create dir : /var/lib/ldap create dir : /var/lib/misc create dir : /var/lib/libvirt create dir : /var/lib/libvirt/dnsmasq create dir : /run/systemd/netif create dir : /run/systemd/resolve create dir : /run/uuidd === create_devlink.sh === Create /var/tmp/devlink from /dev/disk? === startSysMd.sh === -- rebuild mdadm.conf for BOOT, ROOTFS with Intelligent routine -- checkDiskStatus : disk1 unplugged checkDiskLinkSpeed : disk1 unplugged checkDiskPerformance : disk1 unplugged mdadm: cannot open /dev/disk?_1: No such file or directory mdadm: cannot open /dev/disk?_2: No such file or directory mdadm: cannot open /dev/disk?_5: No such file or directory mdadm: No devices listed in conf file were found. -- setup max error counts -- skip md0 (not found in /sys/block) skip md1 (not found in /sys/block) skip md2 (not found in /sys/block) dev.raid.speed_limit_max = 500000 mkdir: can't create directory '/boot': File exists mount: mounting /dev/md0 on /boot/ failed: No such file or directory === fwupdate.sh === [ 21.980550] random: fw_ver_cmp.pl: uninitialized urandom read (4 bytes read) fwupdate.sh: FW not updated === closeSysMd.sh === === sethostname.sh === [ 22.475905] random: fw_ver_cmp.pl: uninitialized urandom read (4 bytes read) configure /etc/hosts based on Buffalo parameters. === restore_config.sh === -- rebuild mdadm.conf for BOOT -- mdadm: cannot open /dev/disk?_1: No such file or directory mdadm: No devices listed in conf file were found. -- setup max error counts -- skip md0 (not found in /sys/block) mount: mounting /dev/md0 on /boot failed: No such file or directory /usr/local/bin/libbuffalo: line 931: truncate: command not found /tmp/etc/localtime -> umount: can't unmount /boot: Invalid argument rootfs on / type rootfs (rw) sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime) proc on /proc type proc (rw,nosuid,nodev,noexec,relatime) udev on /dev type devtmpfs (rw,nosuid,relatime,size=716168k,nr_inodes=179042,mode=755) devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000) tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=150128k,mode=755) PID USER COMMAND 1 root init 2 root [kthreadd] 3 root [ksoftirqd/0] 4 root [kworker/0:0] 5 root [kworker/0:0H] 6 root [kworker/u12:0] 7 root [rcu_preempt] 8 root [rcu_sched] 9 root [rcu_bh] 10 root [migration/0] 11 root [lru-add-drain] 12 root [watchdog/0] 13 root [cpuhp/0] 14 root [cpuhp/1] 15 root [watchdog/1] 16 root [migration/1] 17 root [ksoftirqd/1] 18 root [kworker/1:0] 19 root [kworker/1:0H] 20 root [cpuhp/2] 21 root [watchdog/2] 22 root [migration/2] 23 root [ksoftirqd/2] 24 root [kworker/2:0] 25 root [kworker/2:0H] 26 root [cpuhp/3] 27 root [watchdog/3] 28 root [migration/3] 29 root [ksoftirqd/3] 30 root [kworker/3:0] 31 root [kworker/3:0H] 32 root [cpuhp/4] 33 root [watchdog/4] 34 root [migration/4] 35 root [ksoftirqd/4] 36 root [kworker/4:0] 37 root [kworker/4:0H] 38 root [cpuhp/5] 39 root [watchdog/5] 40 root [migration/5] 41 root [ksoftirqd/5] 42 root [kworker/5:0] 43 root [kworker/5:0H] 44 root [kdevtmpfs] 45 root [netns] 46 root [oom_reaper] 47 root [writeback] 48 root [kworker/2:1] 49 root [crypto] 50 root [bioset] 51 root [kblockd] 52 root [rtk_usb_manager] 53 root [md] 54 root [devfreq_wq] 55 root [watchdogd] 56 root [kworker/4:1] 57 root [kworker/u12:1] 58 root [rpciod] 59 root [xprtiod] 60 root [kworker/1:1] 61 root [kworker/3:1] 62 root [kworker/5:1] 87 root [kswapd0] 88 root [vmstat] 89 root [SquashFS read w] 90 root [ecryptfs-kthrea] 91 root [nfsiod] 92 root [cifsiod] 93 root [cifsoplockd] 103 root [pencrypt] 104 root [pdecrypt] 112 root [bioset] 113 root [bioset] 114 root [bioset] 115 root [bioset] 116 root [bioset] 117 root [bioset] 118 root [bioset] 119 root [bioset] 120 root [bioset] 121 root [bioset] 122 root [bioset] 123 root [bioset] 124 root [bioset] 125 root [bioset] 126 root [bioset] 127 root [bioset] 128 root [rtk sata dev ha] 129 root [bond0] 130 root [kworker/4:2] 131 root [eth1-linkstatus] 132 root [irq/16-9801b600] 133 root [kworker/0:1] 134 root [kworker/u12:2] 135 root [kworker/u12:3] 136 root [raid5wq] 137 root [cfinteractive] 138 root [bioset] 139 root [mmcqd/0] 140 root [bioset] 141 root [mmcqd/0boot0] 142 root [bioset] 143 root [mmcqd/0boot1] 144 root [bioset] 145 root [mmcqd/0rpmb] 147 root [kpktgend_0] 148 root [kpktgend_1] 149 root [kworker/3:2] 150 root [kpktgend_2] 151 root [kpktgend_3] 152 root [kpktgend_4] 153 root [kpktgend_5] 154 root [ipv6_addrconf] 174 root /lib/systemd/systemd-udevd --daemon --resolve-names=never 1218 root [kworker/4:3] 1223 root [scsi_eh_0] 1234 root [scsi_tmf_0] 1249 root [scsi_eh_1] 1255 root [scsi_tmf_1] 1781 root [kworker/1:1H] 1934 root [kworker/0:1H] 1959 root [kworker/2:1H] 3920 root [kworker/3:1H] 3921 root [kworker/5:1H] 3922 root [kworker/5:2] 3923 root [kworker/0:2] 3924 root [kworker/1:2] 3925 root [kworker/2:2] 4338 root {fanctld.sh} /bin/bash /usr/local/sbin/fanctld.sh 4342 root {buttond.sh} /bin/bash /usr/local/sbin/buttond.sh EM-start 4355 root {rcS} /bin/bash /etc/init.d/rcS 5310 root sleep 30 6826 root {restore_config.} /bin/bash /etc/init.d/restore_config.sh start 6962 root [kworker/4:1H] 7026 root ps axwww === EnablingAutoip.sh === /etc/resolvconf/update.d/libc: Warning: /etc/resolv.conf is not a symbolic link to /run/resolvconf/resolv.conf === networking.sh === [ 24.662990] eth0: 0xffffff8008120000, c4:3c:ea:31:18:2d, IRQ 30 [ 25.326943] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready configuring network interfaces. LAN1: eth0 IPaddr=[dhcp], netmask=[], mtu=1518, wait_time=8 priority_order=eth0 default_gateway=[], dns1=[], dns2=[] primary_interface=[eth0] NetDevStart eth0 [ 25.754132] eth0: 0xffffff8008120000, c4:3c:ea:31:18:2d, IRQ 30 [ 26.312108] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready eee unmodified, ignoring checking & resolving IPaddress confliction. arping notify new IPaddress setting up default_gateway configuring route configuring DNS [ 34.693412] random: fw_ver_cmp.pl: uninitialized urandom read (4 bytes read) configure /etc/hosts based on Buffalo parameters. === syslog.sh === /etc/init.d/kernelmon.sh: line 14: 12947 Terminated busybox timeout -t 1 cat /proc/buffalo/kernevnt > /dev/null kernelmon: Reset kernel event queue. === kernelmon.sh === Starting kernelmon: done. === miconmon.sh === #[miconapl.system_set_watchdog; ] === usb.sh === #[miconapl.usb_set_power; ] Creating node for USB device /sys/bus/usb/devices/usb1 BUS_NUM=1 DEV_NUM=1 MAJOR=189 MINOR=0 Creating node for USB device /sys/bus/usb/devices/usb2 BUS_NUM=2 DEV_NUM=1 MAJOR=189 MINOR=128 Creating node for USB device /sys/bus/usb/devices/usb3 BUS_NUM=3 DEV_NUM=1 MAJOR=189 MINOR=256 Creating node for USB device /sys/bus/usb/devices/usb4 BUS_NUM=4 DEV_NUM=1 MAJOR=189 MINOR=384 Creating node for USB device /sys/bus/usb/devices/usb5 BUS_NUM=5 DEV_NUM=1 MAJOR=189 MINOR=512 Creating node for USB device /sys/bus/usb/devices/usb6 BUS_NUM=6 DEV_NUM=1 MAJOR=189 MINOR=640 === clientUtil_servd.sh === Starting clientUtil_server: === daemonwatch.sh === Starting daemonwatch:daemonwatch Ver.1.01 watch list file : /etc/daemonwatch.list === bootcomplete.sh === No need to run drivecheck.sh #[miconapl.boot_end; ] #[miconapl.system_set_watchdog; ] cat: can't open '/tmp/error_status': No such file or directory cat: can't open '/tmp/info_status': No such file or directory cat: can't open '/tmp/error_status': No such file or directory cat: can't open '/tmp/info_status': No such file or directory dev.raid.speed_limit_max = 500000 dev.raid.speed_limit_max = 500000 hdd_raid_syncspeed.sh: Adding EDP md devices hdd_raid_syncspeed.sh: USERLAND_MD=md101 === micon_setup.sh === [ 39.890356] random: fw_ver_cmp.pl: uninitialized urandom read (4 bytes read) cat: can't open '/tmp/error_status': No such file or directory cat: can't open '/tmp/info_status': No such file or directory === late_inspection_phase.sh === === buffalo_rescue.sh === buffalo_rescue.sh: Its not a rescue environment. BUFFALO INC. LinkStation series LS710D-EM82D login:
U-Boot env
Buffalo> env print GTK_SerialNum=20581710319179 OdmSerialNo=20581710319179 SerialNo=10585310500169 audio_loadaddr=0x0f900000 baudrate=115200 blue_logo_loadaddr=0x30000000 bootcmd=boot_buffalo_uImage bootdelay=0 dtbo_loadaddr=0x26400000 eth_drv_para=phy,bypass,noacp,swing0 ethact=r8168#0 ethaddr=00:10:20:30:40:50 fdt_high=0xffffffffffffffff fdt_loadaddr=0x02100000 gatewayip=192.168.100.254 ipaddr=192.168.100.1 kernel_loadaddr=0x02200040 kernelargs=BOOTVER=0.22 root=/dev/ram0 rw ramdisk_size=131072 initrd=0x05000000,32M init=/init boot=buffalofirm boot_device_type=eMMC ubootenv=0x621400,0x20000,0x4,0x00@mmcblk0 ubootenv_redund=0x821400,0x20000,0x4,0x00@mmcblk0 mtd_part=mtdparts=rtk_nand: netmask=255.255.255.0 rescue_audio=bluecore.audio rescue_dtb=rescue.emmc.dtb rescue_rootfs=rescue.root.emmc.cpio.gz_pad.img rescue_rootfs_loadaddr=0x02200000 rescue_vmlinux=emmc.uImage rootfs_loadaddr=0x05000000 serverip=192.168.100.2 Environment size: 966/131068 bytes