Linkstation LS520D
Specs
| CPU | RTD1195N (Dual Core) 1.10 GHz |
| Memory | 256MB DDR3 |
| Bays | 2 |
| Network | 1x 10/100/1000 |
| Sata | 2x SATA (Asmedia 1053 via USB3 it appears) |
| NAND Flash | |
| SPI Flash | MX25L512E |
| USB 2.0 | None |
| USB 3.0 | 1x Back (RTS5411) |
| Fan | Yes |
| Power |
Disassembly
Remove the 3 screws on the bottom of the device and the two screws on the inside right side, then carefully pry the pieces apart. This is not easy.
Root Access
This device can be sent commands via ACP_Commander using the -c option, A shell-like interface is also available using the "-s" option.
Telnet
an actual root shell over telnet can be accessed by doing the following (requires the latest version of acp_commander):
- Download the armhf busybox-static package from Debian
wget http://security.debian.org/debian-security/pool/updates/main/b/busybox/busybox-static_1.22.0-9+deb8u4_armhf.deb
- Extract the package and copy busybox to the same directory as acp_commander
dpkg -x busybox-static_1.22.0-9+deb8u4_armhf.deb . cp bin/busybox .
- Use acp_commander to copy busybox to /tmp on the device
java -jar acp_commander.jar -t 192.168.1.142 -xfer busybox -xferto /tmp
- use acp_commander to blank the root password and start telnet
java -jar acp_commander.jar -t 192.168.1.142 -o
You should now be able to login as "root" via telnet. This method needs to be repeated if the device is restarted.
SSH
@Gogoli discovered you can also just the ssh daemon on the device with the following:
java -jar acp_commander -jar -t 192.168.1.142 -c "/etc/init.d/ssh.bak start"
If needed you can wipe out the root password with:
java -jar acp_commander.jar -t 192.168.1.142 -o
Custom Firmware/Operating System installation
- Create a Debian armhf image and write it to a USB drive using the process found here:
- Connect the usb drive to the device, reboot the device to ensure the drive is detected (probably unnecessary).
- Use ACP Commander to verify that the device automounts the drive to /home/USB/usbdisk1
$ java -jar acp_commander.jar -t ls520d -c "lsblk" NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 1.8T 0 disk |-sda1 8:1 0 1.8T 0 part | `-md1 9:1 0 1.8T 0 raid1 | `-md1p1 259:0 0 1.8T 0 md /home `-sda2 8:2 0 1G 0 part [SWAP] sdb 8:16 0 1.8T 0 disk |-sdb1 8:17 0 1.8T 0 part | `-md1 9:1 0 1.8T 0 raid1 | `-md1p1 259:0 0 1.8T 0 md /home `-sdb2 8:18 0 1G 0 part [SWAP] sdc 8:32 1 7.2G 0 disk `-sdc1 8:33 1 2G 0 part /home/USB/usbdisk1 mtdblock0 31:0 0 33.6M 0 disk mtdblock1 31:1 0 119.6M 0 disk / mtdblock2 31:2 0 70M 0 disk mtdblock3 31:3 0 20M 0 disk mtdblock4 31:4 0 243.3M 0 disk
if not you can try to manually mount it to either /home/USB/usbdisk1 or /mnt/android
- Mount proc,sys and dev for the image
java -jar acp_commander.jar -t 192.168.1.142 -c "mount -t proc none /home/USB/usbdisk1/proc" java -jar acp_commander.jar -t 192.168.1.142 -c "mount -t sysfs none /home/USB/usbdisk1/sys" java -jar acp_commander.jar -t 192.168.1.142 -c "mount -o bind /dev /home/USB/usbdisk1/dev"
- start the ssh daemon inside the image
java -jar acp_commander.jar -t 192.168.1.142 -c "chroot /home/USB/usbdisk1/ /etc/init.d/ssh start"
- You can now connect to the Debian image via ssh and run basically anything you want. The last 2 steps need to be repeated after a reboot.
$ ssh debian@192.168.1.142 Warning: Permanently added '192.168.1.142' (ECDSA) to the list of known hosts. debian@192.168.1.142's password: Linux LS520D1ad 3.10.24-rtk-nas-g0be9683+ #1 SMP PREEMPT Fri Jan 13 16:11:47 CST 2017 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. debian@LS520D1ad:~$ cat /etc/debian_version 9.13
Pictures
Serial Console
Tx can be connected by bridging C276 near the serial header.
Rx can be connected by bridging the similar header on the opposite side of the board under the sticker.
DMESG output
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.24-rtk-nas-g0be9683+ (denis_hsu@CVS6) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Fri Jan 13 16:11:47 CST 2017
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: phoenix, model: Realtek_CA7_CA7
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] remove memory (1048576 bytes at 0x18000000)
[ 0.000000] remove memory (16777216 bytes at 0x18100000)
[ 0.000000] remove memory (1048576 bytes at 0x10000000)
[ 0.000000] cma: CMA: reserved 32 MiB at 04000000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] BUG: mapping for 0xff010000 at 0xff010000 out of vmalloc space
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] free_area_init_node: node 0, pgdat c07ddf40, node_mem_map c0854000
[ 0.000000] DMA zone: 512 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 65536 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c0a5e000 s13184 r8192 d15488 u36864
[ 0.000000] pcpu-alloc: s13184 r8192 d15488 u36864 alloc=9*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: console=ttyS0,115200 earlyprintk loglevel=4 mtdparts=rtk_nand:34432k,122496k(/),71680k(misc),20480k(etc) root=31:01 rootfstype=squashfs ubi.mtd=etc ubi.mtd=misc U-boot=2012.07-g0e00ac3-svn (Nov 24 2015 - 11:51:40)
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] allocated 524288 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 256MB = 256MB total
[ 0.000000] Memory: 212728k/212728k available, 49416k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
.text : 0xc0108000 - 0xc074f590 (6430 kB)
.init : 0xc0750000 - 0xc078b380 ( 237 kB)
.data : 0xc078c000 - 0xc07f6628 ( 426 kB)
.bss : 0xc07f6628 - 0xc0853d94 ( 374 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:320
[ 0.000000] Architected local timer running at 27.00MHz (phys).
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] sched_clock: ARM arch timer >56 bits at 27000kHz, resolution 37ns
[ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000376] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=270000)
[ 0.000390] pid_max: default: 32768 minimum: 301
[ 0.000514] Security Framework initialized
[ 0.000594] Mount-cache hash table entries: 512
[ 0.005053] Initializing cgroup subsys memory
[ 0.005100] Initializing cgroup subsys devices
[ 0.005111] Initializing cgroup subsys freezer
[ 0.005120] Initializing cgroup subsys blkio
[ 0.005128] Initializing cgroup subsys net_prio
[ 0.005168] CPU: Testing write buffer coherency: ok
[ 0.005457] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.005488] Setting up static identity map for 0xc05349c0 - 0xc0534a0c
[ 0.060543] CPU1: Booted secondary processor
[ 0.060579] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.060691] Brought up 2 CPUs
[ 0.060712] SMP: Total of 2 processors activated (108.00 BogoMIPS).
[ 0.060719] CPU: All CPU(s) started in SVC mode.
[ 0.061473] devtmpfs: initialized
[ 0.067680] kworker/u4:0 (19) used greatest stack depth: 6764 bytes left
[ 0.068497] pinctrl core: initialized pinctrl subsystem
[ 0.069133] regulator-dummy: no parameters
[ 0.070482] NET: Registered protocol family 16
[ 0.074968] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.076167] kworker/u4:0 (33) used greatest stack depth: 6572 bytes left
[ 0.087598] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.087611] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.087661] I/SUSPEND: [rtk_suspend_init:641] wakeup-gpio Cnt: en(1) act(0) list(-2)
[ 0.087674] I/SUSPEND: [rtk_suspend_init:721] gpio-output-change Cnt: en(0) act(0) list(-2)
[ 0.087683] I/SUSPEND: [rtk_suspend_init] set suspend-mode = ram
[ 0.087692] I/SUSPEND: [rtk_suspend_init] set set wakeup-flags = 0xc
[ 0.090107] kworker/u4:0 (97) used greatest stack depth: 6508 bytes left
[ 0.111409] bio: create slab <bio-0> at 0
[ 0.112760] SCSI subsystem initialized
[ 0.113468] usbcore: registered new interface driver usbfs
[ 0.113627] usbcore: registered new interface driver hub
[ 0.113848] usbcore: registered new device driver usb
[ 0.114113] [I2C0] mode=i2c, phy=0, port=0
[ 0.114129] [I2C] open I2C0 successed, reference cnt=1
[ 0.114160] [I2C0] KHz = 100, div_h = 127, div_l = 134
[ 0.114172] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.120639] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.130591] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.140590] =========================
[ 0.140600] = VER : 2.2
[ 0.140607] =========================
[ 0.140614] = PHY : 0
[ 0.140621] = PORT: 0
[ 0.140627] = MODEL: Saturn
[ 0.140634] = SPD : 100
[ 0.140642] = SAR : 0x024 (7 bits)
[ 0.140649] = TX FIFO DEPTH : 32
[ 0.140656] = RX FIFO DEPTH : 32
[ 0.140662] = FIFO THRESHOLD: 4
[ 0.140668] =========================
[ 0.141082] [I2C1] mode=i2c, phy=1, port=0
[ 0.141094] [I2C] open I2C1 successed, reference cnt=1
[ 0.141122] [I2C1] KHz = 100, div_h = 127, div_l = 134
[ 0.141134] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.141274] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1416 end
[ 0.150634] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.150776] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1416 end
[ 0.160581] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.160722] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1416 end
[ 0.170577] =========================
[ 0.170586] = VER : 2.2
[ 0.170592] =========================
[ 0.170599] = PHY : 1
[ 0.170606] = PORT: 0
[ 0.170612] = MODEL: Saturn
[ 0.170619] = SPD : 100
[ 0.170626] = SAR : 0x024 (7 bits)
[ 0.170633] = TX FIFO DEPTH : 32
[ 0.170640] = RX FIFO DEPTH : 32
[ 0.170647] = FIFO THRESHOLD: 4
[ 0.170654] = SDA GPIO : MISC_GPIO 52
[ 0.170661] = SCL GPIO : MISC_GPIO 51
[ 0.170667] = BUS JAM RECORVER 3: ON
[ 0.170673] = NON STOP WRITE : OFF
[ 0.170679] = GPIO RW SUPPORT : ON
[ 0.170685] =========================
[ 0.171079] [I2C2] mode=i2c, phy=2, port=0
[ 0.171090] [I2C] open I2C2 successed, reference cnt=1
[ 0.171116] [I2C2] KHz = 100, div_h = 127, div_l = 134
[ 0.171128] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.180602] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.190574] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.200114] =========================
[ 0.200122] = VER : 2.2
[ 0.200128] =========================
[ 0.200135] = PHY : 2
[ 0.200142] = PORT: -1
[ 0.200149] = MODEL: Saturn
[ 0.200155] = SPD : 100
[ 0.200163] = SAR : 0x024 (7 bits)
[ 0.200170] = TX FIFO DEPTH : 128
[ 0.200177] = RX FIFO DEPTH : 128
[ 0.200183] = FIFO THRESHOLD: 4
[ 0.200189] =========================
[ 0.200569] [I2C3] mode=i2c, phy=3, port=0
[ 0.200579] [I2C] open I2C3 successed, reference cnt=1
[ 0.200605] [I2C3] KHz = 100, div_h = 127, div_l = 134
[ 0.200617] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.210124] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.220114] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.230113] =========================
[ 0.230123] = VER : 2.2
[ 0.230129] =========================
[ 0.230136] = PHY : 3
[ 0.230143] = PORT: -1
[ 0.230149] = MODEL: Saturn
[ 0.230156] = SPD : 100
[ 0.230164] = SAR : 0x024 (7 bits)
[ 0.230171] = TX FIFO DEPTH : 128
[ 0.230177] = RX FIFO DEPTH : 128
[ 0.230184] = FIFO THRESHOLD: 4
[ 0.230190] =========================
[ 0.230566] [I2C4] mode=i2c, phy=4, port=0
[ 0.230577] [I2C] open I2C4 successed, reference cnt=1
[ 0.230601] [I2C4] KHz = 100, div_h = 127, div_l = 134
[ 0.230613] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.240571] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.250562] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.260557] =========================
[ 0.260566] = VER : 2.2
[ 0.260573] =========================
[ 0.260579] = PHY : 4
[ 0.260586] = PORT: -1
[ 0.260593] = MODEL: Saturn
[ 0.260600] = SPD : 100
[ 0.260607] = SAR : 0x024 (7 bits)
[ 0.260614] = TX FIFO DEPTH : 32
[ 0.260621] = RX FIFO DEPTH : 32
[ 0.260628] = FIFO THRESHOLD: 4
[ 0.260634] =========================
[ 0.261002] [I2C5] mode=i2c, phy=5, port=0
[ 0.261018] [I2C] open I2C5 successed, reference cnt=1
[ 0.261042] [I2C5] KHz = 100, div_h = 127, div_l = 134
[ 0.261054] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.270114] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.280116] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.290106] =========================
[ 0.290115] = VER : 2.2
[ 0.290121] =========================
[ 0.290128] = PHY : 5
[ 0.290135] = PORT: 0
[ 0.290141] = MODEL: Saturn
[ 0.290148] = SPD : 100
[ 0.290155] = SAR : 0x024 (7 bits)
[ 0.290162] = TX FIFO DEPTH : 32
[ 0.290169] = RX FIFO DEPTH : 32
[ 0.290176] = FIFO THRESHOLD: 4
[ 0.290182] =========================
[ 0.290542] [I2C6] mode=i2c, phy=6, port=0
[ 0.290552] [I2C] open I2C6 successed, reference cnt=1
[ 0.290577] [I2C6] KHz = 100, div_h = 127, div_l = 134
[ 0.290589] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.300113] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.310548] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.320535] =========================
[ 0.320544] = VER : 2.2
[ 0.320550] =========================
[ 0.320557] = PHY : 6
[ 0.320563] = PORT: 0
[ 0.320570] = MODEL: Saturn
[ 0.320577] = SPD : 100
[ 0.320584] = SAR : 0x024 (7 bits)
[ 0.320591] = TX FIFO DEPTH : 32
[ 0.320598] = RX FIFO DEPTH : 32
[ 0.320605] = FIFO THRESHOLD: 4
[ 0.320611] =========================
[ 0.321278] media: Linux media interface: v0.10
[ 0.321431] Linux video capture interface: v2.00
[ 0.322906] Bluetooth: Core ver 2.16
[ 0.323045] NET: Registered protocol family 31
[ 0.323054] Bluetooth: HCI device and connection manager initialized
[ 0.323071] Bluetooth: HCI socket layer initialized
[ 0.323084] Bluetooth: L2CAP socket layer initialized
[ 0.323113] Bluetooth: SCO socket layer initialized
[ 0.323587] cfg80211: Calling CRDA to update world regulatory domain
[ 0.324649] [rtp5901_mfd_init_1195:857] rtp5901 prop ERROR!!!!!
[ 0.324661] Switching to clocksource rtk_counter
[ 0.363138] NET: Registered protocol family 2
[ 0.363728] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.363785] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.363828] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.363872] TCP: reno registered
[ 0.363886] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.363912] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.364137] NET: Registered protocol family 1
[ 0.364454] RPC: Registered named UNIX socket transport module.
[ 0.364464] RPC: Registered udp transport module.
[ 0.364472] RPC: Registered tcp transport module.
[ 0.364479] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.365377] RPC major number: 240
[ 0.365397] rpc is not paused & suspended
[ 0.368601] rtk aes crypto engine enabled
[ 0.368732] rtk_rtc 1801b600.rtc: rtk_rtc_probe 424
[ 0.368760] rtk_rtc 1801b600.rtc: rtk_rtc rtcacr = 0x80
[ 0.369143] rtk_rtc 1801b600.rtc: rtc core: registered rtc as rtc0
[ 0.369728] input: venus_IR_input as /devices/virtual/input/input0
[ 0.371225] [arch/arm/mach-rtk119x/driver/irda/venus_ir.c] get reg-ir-dpir = 50ld us from dtb, regval=0x1350000lx
[ 0.418784] AudioIntrRead:132 can't find process for handling AudioIntrRead programID:98
[ 0.427717] AudioIntrRead: program:98 version:0 procedure:1 taskID:0 sysTID:4294967295 sysPID:4294967295 size:4 context:81c0283d atomic
[ 0.443260] VFS: Disk quotas dquot_6.5.2
[ 0.443393] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.443946] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.444504] fuse init (API version 7.22)
[ 0.445619] msgmni has been set to 479
[ 0.447028] io scheduler noop registered
[ 0.447041] io scheduler deadline registered
[ 0.447080] io scheduler cfq registered (default)
[ 0.447353] Gemtek LED init
[ 0.562377] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
[ 0.564090] 18007800.serial0: ttyS0 at MMIO 0x18007800 (irq = 194) is a 16550A
[ 0.564121] console [ttyS0] enabled, bootconsole disabled
[ 0.565398] 1801b200.serial1: ttyS1 at MMIO 0x1801b200 (irq = 163) is a 16550A
[ 0.576646] brd: module loaded
[ 0.582251] loop: module loaded
[ 0.583646] NF_LOW_PWR:0x0002002c, NF_SWC_LOW_PWR:0x0002002c
[ 0.583658] Realtek NAND Flash Driver Rev:337905 (2010-10-18)
[ 0.583665] (X)Enable interrupt mechanism of NAND driver.
[ 0.583672] Force disable FLASH_WP!!
[ 0.583679] g_regGPIODirBase = 0x1801bc00
[ 0.583685] g_regGPIOOutBase = 0x1801bc18
[ 0.583692] g_NFWP_no = 0
[ 0.583698] g_NFWP_value_en = 0
[ 0.583705] g_NFWP_value_dis = 0
[ 0.583711] g_NFWP_pinType = 0
[ 0.583717] Get parameter from register...
[ 0.583725] [rtk_nand_init]Bootcode size 0xc00000
[ 0.583732] [rtk_nand_init]Factory parameter size 0x400000
[ 0.583739] [rtk_nand_init]Disable NFCP...
[ 0.583757] [**Default**]RBA percentage: 5%
[ 0.583763] Disable software write protect!
[ 0.583770] nand_base_rtk version:0824-2011
[ 0.583777] (X)NAND_POWEROFF_CARDREADER_WITH_MULTI_READ
[ 0.583783] (X)NAND_READ_SKIP_UPDATE_BBT
[ 0.583789] rtk_nand_read_id
[ 0.583799] id_chain 1 = 0x9590da2c
[ 0.583807] id_chain 2 = 0xffff0006
[ 0.583816] READ ID:0x2c 0xda 0x90 0x95 0x6 0x0
[ 0.583825] One MT29F2G08ABAE chip has 1 die(s) on board
[ 0.583841] index(1) nand part=MT29F2G08ABAE, id=0x2cda9095, device_size=268435456, page_size=0x800, block_size=0x20000, oob_size=0x40, num_chips=0x1, isLastPage=0x0, ecc_sel=0x6
[ 0.583850] g_eccSelect 0x6[0x6]
[ 0.583858] [rtk_nand_scan],mtd->u32RBApercentage 5%
[ 0.584025] data==> 0x4e5742c0
[ 0.584034] oob_buf[0]==> 0xbb, page=0x40
[ 0.584044] [rtk_nand_scan_bbt] have created bbt B1, just loads it !!
[ 0.584055] [dump_BBT] Nand BBT Content
[ 0.584062] Congratulation!! No BBs in this Nand.
[ 0.584082] 4 cmdlinepart partitions found on MTD device rtk_nand
[ 0.584092] 4 cmdlinepart partitions found on MTD device rtk_nand
[ 0.584100] Creating 4 MTD partitions on "rtk_nand":
[ 0.584113] 0x000000000000-0x0000021a0000 : "Partition_000"
[ 0.585597] 0x0000021a0000-0x000009940000 : "/"
[ 0.587004] 0x000009940000-0x00000df40000 : "misc"
[ 0.588259] 0x00000df40000-0x00000f340000 : "etc"
[ 0.589496] 0x000000000000-0x00000f340000 : "disc"
[ 0.590872] [rtk_nand_profile] mtd_device_parse_register rc = 0x0
[ 0.590882] [rtk_nand_init]Ecc bit select 6
[ 0.590889] Realtek Nand Flash Driver is successfully installing.
[ 0.590910] tun: Universal TUN/TAP device driver, 1.6
[ 0.590917] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.591281] r8169 Gigabit Ethernet driver 2.5LK-NAPI loaded
[ 0.605621] r8169 18016000.gmac eth0: RTL8168g/8111g at 0xfe016000, 74:03:bd:05:71:ad, XID 10900800 IRQ 54
[ 0.605637] r8169 18016000.gmac eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.605740] [Ethernet] Watch link status change.
[ 0.606057] usbcore: registered new interface driver rtl8150
[ 0.606210] usbcore: registered new interface driver r8152
[ 0.606340] rtk_rbus_init:87
[ 0.606413] rtk_rbus_probe:27
[ 0.607831] dwc3 18020000.dwc3: no usb2 phy configured
[ 0.613104] platform 18020000.dwc3: Driver dwc3 requests probe deferral
[ 0.613847] rtk-usb2phy 18028280.usb2phy: drivers/usb/phy/phy-rtk-usb2.c Initialized RTK USB 2.0 PHY
[ 0.614112] rtk-usb3phy 18013210.usb3phy: drivers/usb/phy/phy-rtk-usb3.c Initialized RTK USB 3.0 PHY
[ 0.614292] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.614303] ehci-platform: EHCI generic platform driver
[ 0.614565] ehci-rtk: EHCI realtek driver
[ 0.626093] [USB_PHY], addr = 0xd4, data = 0x9b
[ 0.626106] [USB_PHY], addr = 0xc0, data = 0xa1
[ 0.626115] [USB_PHY], addr = 0xc1, data = 0x30
[ 0.626125] [USB_PHY], addr = 0xc2, data = 0x9a
[ 0.626235] [USB_PHY], addr = 0xc4, data = 0xd6
[ 0.626245] [USB_PHY], addr = 0xc5, data = 0x1d
[ 0.626354] [USB_PHY], addr = 0xc6, data = 0xc0
[ 0.626366] [USB_PHY], addr = 0xd4, data = 0xbb
[ 0.626375] [USB_PHY], addr = 0xc0, data = 0x35
[ 0.626385] [USB_PHY], addr = 0xc1, data = 0xaf
[ 0.626394] [USB_PHY], addr = 0xc5, data = 0xf
[ 0.626404] [USB_PHY], addr = 0xc6, data = 0x18
[ 0.626414] [USB_PHY], addr = 0xc7, data = 0xe3
[ 0.626453] rtk-ehci 18013000.ehci: EHCI Host Controller
[ 0.626781] rtk-ehci 18013000.ehci: new USB bus registered, assigned bus number 1
[ 0.627386] rtk-ehci 18013000.ehci: irq 53, io mem 0x18013000
[ 0.644423] rtk-ehci 18013000.ehci: USB 2.0 started, EHCI 1.00
[ 0.645499] hub 1-0:1.0: USB hub found
[ 0.645554] hub 1-0:1.0: 1 port detected
[ 0.646102] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.646228] rtk-ohci 18013400.ohci: Rtk Dmp OHCI
[ 0.646530] rtk-ohci 18013400.ohci: new USB bus registered, assigned bus number 2
[ 0.646564] rtk-ohci 18013400.ohci: irq 53, io mem 0x18013400
[ 0.709290] hub 2-0:1.0: USB hub found
[ 0.709349] hub 2-0:1.0: 1 port detected
[ 0.710264] usbcore: registered new interface driver usb-storage
[ 0.711022] mousedev: PS/2 mouse device common for all mice
[ 0.711492] i2c /dev entries driver
[ 0.713341] Bluetooth: HCI UART driver ver 2.2
[ 0.713353] Bluetooth: HCI H4 protocol initialized
[ 0.713360] Bluetooth: HCILL protocol initialized
[ 0.713368] Bluetooth: HCI Three-wire UART (H5) protocol initialized
[ 0.713713] cpufreq: [RM_INIT]
[ 0.713727] cpufreq: Failed to obtain VDDARM: -517
[ 0.718665] cpufreq: Only frequency scaling available
[ 0.756746] cpufreq: [RM_INIT]
[ 0.756754] cpufreq: Failed to obtain VDDARM: -517
[ 0.761655] cpufreq: Only frequency scaling available
[ 0.787738] cpuidle: using governor ladder
[ 0.787746] cpuidle: using governor menu
[ 0.787876] sdhci: Secure Digital Host Controller Interface driver
[ 0.787883] sdhci: Copyright(c) Pierre Ossman
[ 0.787888] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.788083] mmc0: Hardware doesn't specify base clock frequency.
[ 0.794273] Trying to free nonexistent resource <0000000018010c00-0000000018010cff>
[ 0.864974] usbcore: registered new interface driver usbhid
[ 0.864981] usbhid: USB HID core driver
[ 0.865297] oprofile: no performance counters
[ 0.865536] oprofile: using timer interrupt.
[ 0.865618] Netfilter messages via NETLINK v0.30.
[ 0.865633] nfnl_acct: registering with nfnetlink.
[ 0.865679] nf_conntrack version 0.5.0 (3835 buckets, 15340 max)
[ 0.865836] ctnetlink v0.93: registering with nfnetlink.
[ 0.865870] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 0.865876] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 0.866404] xt_time: kernel timezone is -0000
[ 0.866640] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.866771] TCP: cubic registered
[ 0.866833] NET: Registered protocol family 10
[ 0.867424] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 0.867570] NET: Registered protocol family 17
[ 0.867680] Bluetooth: RFCOMM TTY layer initialized
[ 0.867702] Bluetooth: RFCOMM socket layer initialized
[ 0.867708] Bluetooth: RFCOMM ver 1.11
[ 0.867714] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 0.867720] Bluetooth: BNEP filters: protocol multicast
[ 0.867731] Bluetooth: BNEP socket layer initialized
[ 0.867737] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 0.867747] Bluetooth: HIDP socket layer initialized
[ 0.867908] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.867921] avcpu: audio & video cpu driver for Realtek Media Processors
[ 0.868635] realtek_thermal 180171c8.thermal: [rtk_thermal_probe_of] thermal flags is 0xc
[ 0.869520] thermal thermal_zone0: [rtk_thermal_bind] ( (null) ce570e00)
[ 0.869531] thermal thermal_zone0: [rtk_thermal_bind] max_state = 11
[ 0.869553] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed upper:4
[ 6.468919] RTK USB3 phy init
[ 6.474145] [00] 40080010
[ 6.474252] [01] a8780110
[ 6.474358] [02] 60460210
[ 6.474464] [03] 27710310
[ 6.474570] [04] b2f50410
[ 6.474676] [05] 2ad70510
[ 6.474782] [06] 00010610
[ 6.474888] [07] 32000710
[ 6.474994] [08] 35920810
[ 6.475100] [09] 325c0910
[ 6.475206] [0a] d6430a10
[ 6.475312] [0b] a9090b10
[ 6.475418] [0c] c0080c10
[ 6.475524] [0d] ff280d10
[ 6.475630] [0e] 20100e10
[ 6.475736] [0f] 80000f10
[ 6.475842] [10] 000c1010
[ 6.475948] [11] 4c001110
[ 6.476054] [12] fc001210
[ 6.476160] [13] 0c811310
[ 6.476266] [14] de011410
[ 6.476372] [15] 00001510
[ 6.476478] [16] 00001610
[ 6.476584] [17] 00001710
[ 6.476690] [18] 00001810
[ 6.476796] [19] 38041910
[ 6.476902] [1a] 12601a10
[ 6.477008] [1b] ff0c1b10
[ 6.477114] [1c] cb1c1c10
[ 6.477220] [1d] a03f1d10
[ 6.477326] [1e] c2001e10
[ 6.477432] [1f] 90001f10
[ 6.477538] [20] 94ff2010
[ 6.477644] [21] aaff2110
[ 6.477750] [22] 00512210
[ 6.477856] [23] db602310
[ 6.477963] [24] 08002410
[ 6.478068] [25] 00002510
[ 6.478175] [26] 00042610
[ 6.478281] [27] 01d62710
[ 6.478387] [28] f8402810
[ 6.478493] [29] 30802910
[ 6.478599] [2a] 30832a10
[ 6.478706] [2b] 20382b10
[ 6.478812] [2c] ffff2c10
[ 6.478918] [2d] ffff2d10
[ 6.479024] [2e] 00002e10
[ 6.479130] [2f] 00002f10
[ 6.678955] [USB2_PHY], addr = 0xd4, data = 0x9b
[ 6.678963] [USB2_PHY], addr = 0xc0, data = 0xa1
[ 6.678970] [USB2_PHY], addr = 0xc1, data = 0x30
[ 6.678976] [USB2_PHY], addr = 0xc2, data = 0x9a
[ 6.678983] [USB2_PHY], addr = 0xc4, data = 0xd6
[ 6.678990] [USB2_PHY], addr = 0xc5, data = 0x1d
[ 6.678996] [USB2_PHY], addr = 0xc6, data = 0xc0
[ 6.679004] [USB2_PHY], addr = 0xd4, data = 0xbb
[ 6.679011] [USB2_PHY], addr = 0xc0, data = 0x35
[ 6.679017] [USB2_PHY], addr = 0xc1, data = 0xaf
[ 6.679024] [USB2_PHY], addr = 0xc5, data = 0xf
[ 6.679031] [USB2_PHY], addr = 0xc6, data = 0x18
[ 6.679037] [USB2_PHY], addr = 0xc7, data = 0xe3
[ 6.779240] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[ 6.779501] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3
[ 6.780235] xhci-hcd xhci-hcd.2.auto: irq 53, io mem 0x18020000
[ 6.780832] xHCI xhci_add_endpoint called for root hub
[ 6.780840] xHCI xhci_check_bandwidth called for root hub
[ 6.781047] hub 3-0:1.0: USB hub found
[ 6.781088] hub 3-0:1.0: 1 port detected
[ 6.781350] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[ 6.781577] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4
[ 6.782155] xHCI xhci_add_endpoint called for root hub
[ 6.782163] xHCI xhci_check_bandwidth called for root hub
[ 6.782386] hub 4-0:1.0: USB hub found
[ 6.782423] hub 4-0:1.0: 1 port detected
[ 6.783052] ubi0: attaching mtd3
[ 6.784317] nand_read:1021 allocate from dma_alloc_coherent, nrBuffer=0xc4110000, nrPhys_addr=0x04110000
[ 6.836757] ubi0: scanning is finished
[ 6.840500] ubi0 warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 22, need 39
[ 6.841105] ubi0: attached mtd3 (name "etc", size 20 MiB)
[ 6.841114] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 6.841122] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 6.841129] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 6.841135] ubi0: good PEBs: 160, bad PEBs: 0, corrupted PEBs: 0
[ 6.841142] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 6.841151] ubi0: max/mean erase counter: 22/7, WL threshold: 1024, image sequence number: 1625748688
[ 6.841158] ubi0: available PEBs: 0, total reserved PEBs: 160, PEBs reserved for bad PEB handling: 22
[ 6.841174] ubi0: background thread "ubi_bgt0d" started, PID 1136
[ 6.841185] ubi1: attaching mtd2
[ 6.978088] hub 3-0:1.0: port 1 portstatus 101 portchange 00
[ 6.978100] hub 3-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 7.097954] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 7.100502] ubi1: scanning is finished
[ 7.100974] [DBG][rtk_read_ecc_page] page(0x15fc4) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 7.100979] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 7.105284] ubi1: attached mtd2 (name "misc", size 70 MiB)
[ 7.105293] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 7.105300] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 7.105307] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 7.105314] ubi1: good PEBs: 560, bad PEBs: 0, corrupted PEBs: 0
[ 7.105321] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 7.105329] ubi1: max/mean erase counter: 1/0, WL threshold: 1024, image sequence number: 1004243245
[ 7.105336] ubi1: available PEBs: 0, total reserved PEBs: 560, PEBs reserved for bad PEB handling: 39
[ 7.105351] ubi1: background thread "ubi_bgt1d" started, PID 1140
[ 7.105378] rtk_rtc 1801b600.rtc: setting system clock to 2020-07-19 20:27:09 UTC (1595190429)
[ 7.108643] VFS: Mounted root (squashfs filesystem) readonly on device 31:1.
[ 7.111782] devtmpfs: mounted
[ 7.112002] Freeing unused kernel memory: 236K (c0750000 - c078b000)
[ 7.148931] kworker/u4:0 (1143) used greatest stack depth: 5732 bytes left
[ 7.165663] hub 3-1:1.0: USB hub found
[ 7.166246] hub 3-1:1.0: 4 ports detected
[ 7.200315] hub 4-0:1.0: port 1 portstatus 203 portchange 00
[ 7.200331] hub 4-0:1.0: port 1, status 0203, change 0000, 5.0 Gb/s
[ 7.297920] [DBG][rtk_read_ecc_page] page(0x4b4f) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 7.297934] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 7.317979] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 7.343883] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted.
[ 7.359610] hub 4-1:1.0: USB hub found
[ 7.360378] hub 4-1:1.0: 4 ports detected
[ 7.521848] [DBG][rtk_read_ecc_page] page(0x4bf1) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 7.521861] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 7.555410] [DBG][rtk_read_ecc_page] page(0x5151) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 7.555423] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 7.557884] hub 4-1:1.0: port 1 portstatus 203 portchange 00
[ 7.557898] hub 4-1:1.0: port 1, status 0203, change 0000, 5.0 Gb/s
[ 7.632941] expr (1148) used greatest stack depth: 5600 bytes left
[ 7.638576] usb 4-1.1: new SuperSpeed USB device number 3 using xhci-hcd
[ 7.657634] usb 4-1.1: Parent hub missing LPM exit latency info. Power management will be impacted.
[ 7.660212] hub 4-1:1.0: port 2 portstatus 203 portchange 00
[ 7.660226] hub 4-1:1.0: port 2, status 0203, change 0000, 5.0 Gb/s
[ 7.748469] usb 4-1.2: new SuperSpeed USB device number 4 using xhci-hcd
[ 7.767587] usb 4-1.2: Parent hub missing LPM exit latency info. Power management will be impacted.
[ 7.770470] hub 4-1:1.0: port 2 portstatus 203 portchange 00
[ 7.827240] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 1159
[ 7.853683] nand_write:1561 allocate from dma_alloc_coherent, nwBuffer=0xc4330000, nwPhys_addr=0x04330000
[ 7.929259] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "etc"
[ 7.929271] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 7.929281] UBIFS (ubi0:0): FS size: 15745024 bytes (15 MiB, 124 LEBs), journal size 2793472 bytes (2 MiB, 22 LEBs)
[ 7.929288] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
[ 7.929299] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID C4F7E043-BBB7-4448-B1CE-2F9D69E2FD57, small LPT model
[ 7.930615] mount (1157) used greatest stack depth: 5460 bytes left
[ 7.947076] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 1162
[ 8.000372] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "misc"
[ 8.000384] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 8.000394] UBIFS (ubi1:0): FS size: 64249856 bytes (61 MiB, 506 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 8.000401] UBIFS (ubi1:0): reserved for root: 0 bytes (0 KiB)
[ 8.000412] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID BDBE4ED3-491F-4E35-A8F0-DE2119989C43, small LPT model
[ 8.095596] [DBG][rtk_read_ecc_page] page(0x45c7) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 8.095609] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 8.142280] date (1165) used greatest stack depth: 5324 bytes left
[ 8.260666] tar (1170) used greatest stack depth: 5172 bytes left
[ 8.563267] [DBG][rtk_read_ecc_page] page(0x4727) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 8.563280] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 8.660939] [DBG][rtk_read_ecc_page] page(0x504a) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 8.660952] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 8.942168] [DBG][rtk_read_ecc_page] page(0x8b27) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 8.942180] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 10.906172] [DBG][rtk_read_ecc_page] page(0xfcc3) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 10.906186] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 11.074168] [DBG][rtk_read_ecc_page] page(0xbae3) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 11.074182] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 11.179827] [DBG][rtk_read_ecc_page] page(0x9ddd) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 11.179841] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 11.305316] [DBG][rtk_read_ecc_page] page(0xe412) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 11.305330] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 11.553117] [DBG][rtk_read_ecc_page] page(0xf721) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 11.553132] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 12.103388] [DBG][rtk_read_ecc_page] page(0xfcf5) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 12.103402] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 12.316594] [DBG][rtk_read_ecc_page] page(0xf983) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 12.316608] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 12.758564] [DBG][rtk_read_ecc_page] page(0x4f06) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 12.758578] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 13.773628] [DBG][rtk_read_ecc_page] page(0x55e8) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 13.773642] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 14.067006] [DBG][rtk_read_ecc_page] page(0x670b) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 14.067020] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 14.157921] [DBG][rtk_read_ecc_page] page(0x6747) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 14.157935] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 14.198908] udevd[1355]: starting version 175
[ 14.299416] [DBG][rtk_read_ecc_page] page(0x46db) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 14.299430] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 15.014171] scsi0 : uas
[ 15.014870] scsi 0:0:0:0: Direct-Access ASMT 2115 0 PQ: 0 ANSI: 6
[ 15.015541] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 15.016730] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 15.016740] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 15.017285] sd 0:0:0:0: [sda] Write Protect is off
[ 15.017298] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 15.017544] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 15.017677] xhci-hcd xhci-hcd.2.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 15.027472] xhci-hcd xhci-hcd.2.auto: @0000000004106b50 00000000 00000000 1b000000 03038001
[ 15.054407] sda: sda1 sda2
[ 15.056287] sd 0:0:0:0: [sda] Attached SCSI disk
[ 15.151453] scsi1 : uas
[ 15.152112] scsi 1:0:0:0: Direct-Access ASMT 2115 0 PQ: 0 ANSI: 6
[ 15.152749] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 15.152969] usbcore: registered new interface driver uas
[ 15.154235] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 15.154245] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 15.154712] sd 1:0:0:0: [sdb] Write Protect is off
[ 15.154724] sd 1:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 15.154961] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 15.155098] xhci-hcd xhci-hcd.2.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 15.164892] xhci-hcd xhci-hcd.2.auto: @0000000004106180 00000000 00000000 1b000000 04038000
[ 15.184609] sdb: sdb1 sdb2
[ 15.186248] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 19.673075] md: md1 stopped.
[ 19.675109] md: bind<sdb1>
[ 19.675567] md: bind<sda1>
[ 19.726809] md: raid1 personality registered for level 1
[ 19.727996] md1: Warning: Device sda1 is misaligned
[ 19.728008] md1: Warning: Device sdb1 is misaligned
[ 19.728014] md/raid1:md1: active with 2 out of 2 mirrors
[ 19.728098] md1: detected capacity change from 0 to 1998924349440
[ 19.735754] md1: p1
[ 20.686114] Adding 1048572k swap on /dev/sda2. Priority:-1 extents:1 across:1048572k
[ 20.689234] Adding 1048572k swap on /dev/sdb2. Priority:-2 extents:1 across:1048572k
[ 21.049866] write procfs ethernet wol_enable = 1
[ 21.116586] jnl: driver (lke_9.2.0 lke_9.2.0_r249539_b3, LBD=ON) loaded at bf837000
[ 21.191994] [DBG][rtk_read_ecc_page] page(0x59c8) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 21.192013] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 21.354455] ufsd: module license 'Commercial product' taints kernel.
[ 21.354469] Disabling lock debugging due to kernel taint
[ 21.361173] ufsd:: trace mask set to 0000000f
[ 21.361190] ufsd: driver (lke_9.2.0 lke_9.2.0_r249539_b3, build_host("KensComp"), acl, ioctl, bdi, sd2(0), fua, bz, tr, rsrc) loaded at bf844000
NTFS support included
exFAT support included
Hfs+/HfsJ support included
optimized: speed
Build_for__Realtek_RTD1195_a4.x_k3.10.24_2015-05-29_lke_9.2.0_r249539_b3
[ 21.578201] cryptodev: driver 1.7 loaded.
[ 22.246031] r8169 18016000.gmac eth0: rtl_csiar_cond == 0 (loop: 100, delay: 10).
[ 22.255133] r8169 18016000.gmac eth0: rtl_csiar_cond == 1 (loop: 100, delay: 10).
[ 22.264674] r8169 18016000.gmac eth0: link down
[ 22.264775] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.272771] r8169 18016000.gmac eth0: link down
[ 25.672238] r8169 18016000.gmac eth0: link up
[ 25.672284] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 25.721276] r8169 18016000.gmac eth0: rtl_csiar_cond == 0 (loop: 100, delay: 10).
[ 25.740189] r8169 18016000.gmac eth0: rtl_csiar_cond == 1 (loop: 100, delay: 10).
[ 25.759272] r8169 18016000.gmac eth0: link up
[ 30.506995] EXT4-fs (md1p1): mounted filesystem with ordered data mode. Opts: acl,user_xattr,usrjquota=.aquota.user,grpjquota=.aquota.group,jqfmt=vfsv0
[ 32.077798] [DBG][rtk_read_ecc_page] page(0x1c2ac) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 32.077811] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 32.078042] [DBG][rtk_read_ecc_page] page(0x1c2ac) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 32.078051] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 32.079984] [DBG][rtk_read_ecc_page] page(0x1c2ac) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 32.079996] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 32.247492] [DBG][rtk_read_ecc_page] page(0x1021b) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 32.247506] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 32.859371] [DBG][rtk_read_ecc_page] page(0xfe70) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 32.859386] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 33.445718] [DBG][rtk_read_ecc_page] page(0x102b7) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 33.445733] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 33.877741] [DBG][rtk_read_ecc_page] page(0xf15a) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 33.877756] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 34.000662] [DBG][rtk_read_ecc_page] page(0xf2b5) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 34.000676] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 34.063754] [DBG][rtk_read_ecc_page] page(0xf185) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 34.063769] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 34.211581] [DBG][rtk_read_ecc_page] page(0x8f36) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 34.211596] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 34.540747] [DBG][rtk_read_ecc_page] page(0x8a5e) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 34.540763] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 34.644879] [DBG][rtk_read_ecc_page] page(0xd5da) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 34.644893] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 36.018543] [DBG][rtk_read_ecc_page] page(0xf217) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 36.018560] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 37.480621] [DBG][rtk_read_ecc_page] page(0x9f48) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 37.480637] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 38.186702] [DBG][rtk_read_ecc_page] page(0xb737) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 38.186717] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 38.490563] [DBG][rtk_read_ecc_page] page(0x7ddd) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 38.490579] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 38.609352] [DBG][rtk_read_ecc_page] page(0x7c4e) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 38.609368] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 39.114745] [DBG][rtk_read_ecc_page] page(0xfe26) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 39.114761] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 39.201073] [DBG][rtk_read_ecc_page] page(0xe173) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 39.201088] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 39.606376] [DBG][rtk_read_ecc_page] page(0x7ad1) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 39.606391] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 39.607146] [DBG][rtk_read_ecc_page] page(0x7ad6) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 39.607156] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 39.836062] [DBG][rtk_read_ecc_page] page(0x7d8f) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 39.836077] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 39.840514] [DBG][rtk_read_ecc_page] page(0x7dad) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 39.840526] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 39.980060] [DBG][rtk_read_ecc_page] page(0x7bf3) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 39.980076] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 42.235752] [DBG][rtk_read_ecc_page] page(0x13fc9) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 42.235766] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 42.236235] [DBG][rtk_read_ecc_page] page(0x13fc9) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 42.236244] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 42.250780] [DBG][rtk_read_ecc_page] page(0x13fc9) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 42.250794] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 42.253633] [DBG][rtk_read_ecc_page] page(0x13fcb) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 42.253645] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 42.395164] [DBG][rtk_read_ecc_page] page(0x753a) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 42.395179] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 43.567975] [DBG][rtk_read_ecc_page] page(0x1c2ac) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 43.567990] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 44.291122] [DBG][rtk_read_ecc_page] page(0x13fcb) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 44.291138] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 44.293312] [DBG][rtk_read_ecc_page] page(0x13fcb) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 44.293325] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 44.294824] [DBG][rtk_read_ecc_page] page(0x13fcb) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 44.294833] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 44.295520] [DBG][rtk_read_ecc_page] page(0x13fcb) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 44.295530] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 44.302044] [DBG][rtk_read_ecc_page] page(0x13fcb) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 44.302060] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 44.321451] [DBG][rtk_read_ecc_page] page(0x1360e) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 44.321468] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 44.328643] [DBG][rtk_read_ecc_page] page(0x1360e) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 44.328659] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 44.328882] [DBG][rtk_read_ecc_page] page(0x1360e) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 44.328893] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 44.385747] [DBG][rtk_read_ecc_page] page(0x13fc9) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 44.386090] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 44.386749] [DBG][rtk_read_ecc_page] page(0x13fc9) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 44.386762] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 44.388104] [DBG][rtk_read_ecc_page] page(0x13fc9) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 44.388114] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 44.389438] [DBG][rtk_read_ecc_page] page(0x13fc9) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 44.389448] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 44.391062] [DBG][rtk_read_ecc_page] page(0x13fc9) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 44.391074] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 44.391522] [DBG][rtk_read_ecc_page] page(0x13fc9) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 44.391532] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 44.392910] [DBG][rtk_read_ecc_page] page(0x13fc9) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 44.392922] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 44.393996] [DBG][rtk_read_ecc_page] page(0x13fc9) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 44.394007] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 44.395605] [DBG][rtk_read_ecc_page] page(0x13fc9) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 44.395615] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 44.522627] [DBG][rtk_read_ecc_page] page(0x13fcb) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 44.522642] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 44.524812] [DBG][rtk_read_ecc_page] page(0x13fcb) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 44.524827] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 44.527400] [DBG][rtk_read_ecc_page] page(0x13fcb) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 44.527416] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 44.529458] [DBG][rtk_read_ecc_page] page(0x13fcb) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 44.529472] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 44.531412] [DBG][rtk_read_ecc_page] page(0x13fcb) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 44.531425] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 44.569098] cp (4189) used greatest stack depth: 5028 bytes left
[ 45.281555] monit (4106): /proc/4168/oom_adj is deprecated, please use /proc/4168/oom_score_adj instead.
[ 48.489030] dms_sync (4613) used greatest stack depth: 4464 bytes left
[ 50.580933] cpufreq: [RM_ENABLE]
[ 77.695995] cpufreq: [RM_DISABLE]
[ 78.957607] cpufreq: [RM_ENABLE]
[ 88.130387] cpufreq: [RM_DISABLE]
[ 89.691499] cpufreq: [RM_ENABLE]
[ 108.899224] cpufreq: [RM_DISABLE]
[ 110.520385] cpufreq: [RM_ENABLE]
[ 117.885837] cpufreq: [RM_DISABLE]
[ 119.656605] cpufreq: [RM_ENABLE]
[ 129.867823] cpufreq: [RM_DISABLE]
[ 131.638658] cpufreq: [RM_ENABLE]
[ 138.874695] cpufreq: [RM_DISABLE]
[ 140.475450] cpufreq: [RM_ENABLE]
[ 176.298269] cpufreq: [RM_DISABLE]
[ 178.019209] cpufreq: [RM_ENABLE]
[ 224.246530] cpufreq: [RM_DISABLE]
[ 225.800416] cpufreq: [RM_ENABLE]
[ 282.638941] cpufreq: [RM_DISABLE]
[ 284.240169] cpufreq: [RM_ENABLE]
[ 461.331238] cpufreq: [RM_DISABLE]
[ 463.192130] cpufreq: [RM_ENABLE]
U-Boot env
baudrate=115200 bootargs=console=ttyS0,115200 earlyprintk loglevel=4 bootcmd=bootr bootdelay=0 ethaddr=74:03:BD:05:XX:XX fdt_loadaddr=0x01FF2000 gatewayip=192.168.0.254 inspection=0 ipaddr=192.168.0.9 kernel_loadaddr=0x03000000 manufactory_firmware=firmware_LS520D mtd_part=mtdparts=rtk_nand: netmask=255.255.255.0 rescue_audio=bluecore.audio rescue_dtb=rescue.nand.dtb rescue_rootfs=rescue.root.nand.cpio.gz_pad.img rescue_vmlinux=nand.uImage rootfs_loadaddr=0x02200000 serverip=192.168.0.200 uid_buffalo_520=0 Buffalo_PID=0x00003012 Buffalo_ModelName=LS520D Buffalo_SerialNum=4040457110XXXX Buffalo_Region=US
Firmware Layout
#define CREATE_DATE " Mar 28 2017 " #define CREATE_TIME " 14:31:38 " #define BOOTTYPE " BOOTTYPE_COMPLETE " #define SSUWORKPART 0 #define BOOTPART 0 #define FW_KERNEL " target=3000000 offset=d80000 size=33dad0 type=bin name=omv/nand.uImage " #define FW_RESCUE_DT " target=1ff2000 offset=c40000 size=5c8a type=bin name=omv/rescue.nand.dtb " #define FW_KERNEL_DT " target=1ff2000 offset=c60000 size=62b5 type=bin name=omv/android.nand.dtb " #define FW_RESCUE_ROOTFS " target=2200000 offset=10c0000 size=400000 type=bin name=omv/rescue.root.nand.cpio.gz_pad.img " #define FW_NAS_RESCUE_KERNEL " target=3000000 offset=4e0000 size=347238 type=bin name=omv/nas.nand.uImage " #define FW_NAS_RESCUE_DT " target=1ff2000 offset=4c0000 size=5c8a type=bin name=omv/nas.rescue.nand.dtb " #define FW_NAS_RESCUE_ROOTFS " target=2200000 offset=840000 size=400000 type=bin name=omv/nas.rescue.root.nand.cpio.gz_pad.img " #define FW_AKERNEL " target=1b00000 offset=c80000 size=f6ac0 type=bin name=omv/bluecore.audio " #define FW_FWTBL " target=0 offset=480000 size=180 type= name=omv/fw_tbl.bin " #define PART0 " offset=df40000 size=1400000 mount_point=etc mount_dev=/dev/mtd/mtd3 filesystem=ubifs partname=etc type=img name=omv/ubifs_etc.img " #define PART1 " offset=1d20000 size=7c20000 mount_point=/ mount_dev=/dev/mtd/mtd1 filesystem=squashfs partname=rootfs type=img name=omv/squashfs1.img " #define PART2 " offset=9940000 size=4600000 mount_point=misc mount_dev=/dev/mtd/mtd2 filesystem=ubifs partname=misc type=img name=omv/ubifs_misc.img " #define TAG 37
Firmware Notes
The "recovery" image provided by Buffalo and the standard install image are the same file packaged with different instructions (at least for version 4.50).
A copy of the Firmware environment and layout are stored in a tar file which can be extracted with this command:
dd if=/dev/mtdblock4 of=output.tar bs=131072 count=2 skip=34