Linkstation LS510D
Specs
| CPU | |
| Memory | |
| Bays | |
| Network | |
| Sata | |
| NAND Flash | |
| SPI Flash | |
| USB 2.0 | |
| USB 3.0 | |
| Fan | |
| Power |
Stock Firmware Installation
Device Notes
Pictures
Root Access
@Gogoli noticed you can just start the ssh daemon on the device. Combined with wiping out the root password with the "-o" root access is pretty easy using acp_commander
$ java -jar acp_commander.jar -t 192.168.1.210 -o Welcome to ACP Commander v0.6 (2021), the tool for Buffalo stock firmware control! Resetting root password... passwd: password expiry information changed. Starting telnetd... ........Failed! Unable to detect telnet server. This could be a firewall issue but more likely this model does not have a telnetd binary installed. Consider using "-s" as an alternative.
$java -jar acp_commander.jar -t 192.168.1.210 -c "/etc/init.d/ssh.bak start" Welcome to ACP Commander v0.6 (2021), the tool for Buffalo stock firmware control! generating ssh rsa key... generating ssh dsa key... generating ssh ecdsa key... Starting OpenBSD Secure Shell server: sshd.
$ ssh [email protected] The authenticity of host '192.168.1.210 (192.168.1.210)' can't be established. ECDSA key fingerprint is SHA256:7o8cvk3YydNY+Y1JM1/AQ9MthoO2Diwk6EyiSZpksqY. This key is not known by any other names. Are you sure you want to continue connecting (yes/no/[fingerprint])? yes Warning: Permanently added '192.168.1.210' (ECDSA) to the list of known hosts. [email protected]'s password: Linux NAS-TIX 3.10.24-rtk-nas-g0be9683+ #3 SMP PREEMPT Tue Jul 3 20:07:46 CST 2018 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. admin@NAS-TIX:~$ su - root@NAS-TIX:~#
Serial Console
U-Boot Output
?hbj
U-Boot 2012.07-ga370416-svn (Jan 12 2017 - 20:18:15)
CPU : Cortex-A7 dual core
Board: Realtek QA Board
DRAM: 256 MiB
Watchdog: Disabled
Cache: Enabled
Non-Cache Region: 1 MB@0x07900000
NAND: Realtek NAND Flash Driver Rev:337905 (2010-10-18)
[Default]RBA percentage: 5'%'
(X)NAND_POWEROFF_CARDREADER_WITH_MULTI_READ
(X)NAND_READ_SKIP_UPDATE_BBT
[Phoenix]READ ID:0x2c 0xda 0x90 0x95 0x6 0x0
One MT29F2G08ABAE chip has 1 die(s) on board with index(1)
index(1) nand part=MT29F2G08ABAE, id=0x2cda9095, device_size=0x10000000, page_size=0x800, block_size=0x20000, oob_size=0x40, num_chips=0x1, isLastPage=0x0, ecc_sel=0x0
[rtk_nand_scan_bbt] have created bbt B1, just loads it !!
[dump_BBT] Nand BBT Content
Congratulation!! No BBs in this Nand.
256 MiB
Factory: NAND
Factory: seq:0x47, blk:0x0(pp:0), size:0x2200 (to 0x7000000)
get_bootparam:
------------can't find tmp/factory/000BootParam.h
In: serial
Out: serial
Err: serial
Net: Realtek PCIe GBE Family Controller mcfg = 0024
dev->name=r8168#0
Hit Esc or Tab key to enter console mode or rescue linux: 0
------------can't find tmp/factory/recovery
------------Entering Factory Rescue
======== Checking into android recovery ====
Start Boot Setup ...
Kernel:
FW Image to 0x03000000, size=0x0033e038 (0x0333e038)
FW Image fr 0x00d80000 (non-lzma)
DT:
FW Image to 0x01ff2000, size=0x000062b5 (0x01ff82b5)
FW Image fr 0x00c60000 (non-lzma)
Audio FW:
FW Image to 0x01b00000, size=0x000f6ac0 (0x01bf6ac0)
FW Image fr 0x00c80000 (non-lzma)
Start A/V Firmware ...
r# Booting kernel fr[omAU DLeIgaOc]y RImoasgeS atta 0r30t0T00a00s k..C.
in a ItmaegeH Noaomek: 1 L!
udx-o3. 10r.t24k-r_tsk-tnaasn-gd0bbey96_83t+a
k _Imcargee Taytpee:
rARtMk L_insutx aKenrdnebl yI_matgea s(uknc_ocmprreesasetd)e
t Dadtao Sirzet:k _ s3ta39n9d67b2y B_ytteas s= k_3.c2r MeiaB
e eLonadd
dA
drHesDsM: I00 1R08a00w0
n abEnltery: MPoPiGnt : A 0C0130 8D00TS0
M PVeEriGf2yi nAg AChCec DksuDm P. .. WMAPRO MLP
SPDIF Raw Enable: MPG AC3 DTS MPEG2 AAC DDP WMAPRO MLP
Force 2ch Format: DTS DTSHD AC3 DDP MLP AAC WMAPRO
VO_Init: VO_Dmem 0xb0008000 size 80
VO_Init: 2, VO_Dmem->VO_data 0x81c112c0 size 111728
newRegMap 0xb0008018
[VO_SetVideoStandard]st 30 p 1 1 0
0VO_SetVideoStandard]ped 1 data0 0x00000004 data1 0x0OK0
en#00 F0l0at0t
e[Vd OD_evSiceet TVreied beloobS att a0n1fdf2a0r00d
dt st B oo3ti0n g pus i1ng t1h e 0f
[bVloOb _atS e0xt01Vfif2d00e0o
S t Laoandidnag rKedrn]epl eIdma ge1 ..d. ata0 0x00000004 data1 0x00000000
inten.i 0 hdmi 0
[VO setTVStandard 30 3D 0 0]
(TVE) TVE_DAC_mode 0,,cmd->enProg 1!! ~~comp 0, ch2 1, mode_3D 0!!
~~TVE standard#
OK
OK
Starting kernel ...
SetVideoStandard return!
(VO_ConfigHDMI_InfoFrame) L:231, is_hdmi_plugin 1, hdmiMode 1!!Mode 1 dataByte1 0x00000040 0x000000a8 0x00000000
dataByte4 0x00000000 0x00000000 int0 0x00000001
Mode 1 dataByte1 0x00000040 0x000000a8 0x00000000
dataByte4 0x00000000 0x00000000 int0 0x00000001
(HDMI_3D) mode 1, HDMI_gen 1, En_3D 0, Format_3D 0!!Video_Format 22
go back SET_HDMI!!boot_info 0xa0000000 magic 0x2ab0f092 en 36
[ 0.141317] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1416 end
[ 0.160726] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1416 end
[ 0.170767] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1416 end
[ 0.381221] [arch/arm/mach-rtk119x/driver/irda/venus_ir.c] get reg-ir-dpir = 50ld us from dtb, regval=0x1350000lx
[ROS: openRPC() intr_scpu_dev_r buf 0x00e2ffa1 s 0x00e2ffa1 e 0x00e4ffa1 i 0x00e2ffa1[ROS: openStubRPC() intr_scpu_dev_w buf 0x00e6ffa1 s 0x00e6ffa1 e 0x00e8ffa1 i[AVCPU] Set Debug level 0x00
000001
-------------------
Audio Version = 1122334455 (phoenix)
Common Version = 0
Binary src compiled at Mar 12 2015 13:37:38
Note =
-------------------
[A] gloabl malloc size 0x003ffeb8
DMESG output
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.24-rtk-nas-g0be9683+ (steven_lin@cvs8) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #3 SMP PREEMPT Tu
e Jul 3 20:07:46 CST 2018
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: phoenix, model: Realtek_CA7_CA7
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] remove memory (1048576 bytes at 0x18000000)
[ 0.000000] remove memory (16777216 bytes at 0x18100000)
[ 0.000000] remove memory (1048576 bytes at 0x10000000)
[ 0.000000] cma: CMA: reserved 32 MiB at 04000000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] BUG: mapping for 0xff010000 at 0xff010000 out of vmalloc space
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] free_area_init_node: node 0, pgdat c07cff40, node_mem_map c0846000
[ 0.000000] DMA zone: 512 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 65536 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c0a50000 s13184 r8192 d15488 u36864
[ 0.000000] pcpu-alloc: s13184 r8192 d15488 u36864 alloc=9*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: root=/dev/ubiblock0_0 ubi.mtd=/ ubi.block=0,rootfs rootwait console=ttyS0,115200 earlyprintk loglevel=4 mtdparts=rtk_nand:29824k,127104k(/),71680k(misc),20480k(etc
) root=31:01 rootfstype=squashfs ubi.mtd=etc ubi.mtd=misc U-boot=2012.07-ga370416-svn (Jan 12 2017 - 20:18:15)
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] allocated 524288 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 256MB = 256MB total
[ 0.000000] Memory: 212784k/212784k available, 49360k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
.text : 0xc0108000 - 0xc073f0a0 (6365 kB)
.init : 0xc0740000 - 0xc077c380 ( 241 kB)
.data : 0xc077e000 - 0xc07e8628 ( 426 kB)
.bss : 0xc07e8628 - 0xc0845d94 ( 374 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:320
[ 0.000000] Architected local timer running at 27.00MHz (phys).
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] sched_clock: ARM arch timer >56 bits at 27000kHz, resolution 37ns
[ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000378] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=270000)
[ 0.000392] pid_max: default: 32768 minimum: 301
[ 0.000517] Security Framework initialized
[ 0.000595] Mount-cache hash table entries: 512
[ 0.005028] Initializing cgroup subsys memory
[ 0.005075] Initializing cgroup subsys devices
[ 0.005086] Initializing cgroup subsys freezer
[ 0.005094] Initializing cgroup subsys blkio
[ 0.005102] Initializing cgroup subsys net_prio
[ 0.005144] CPU: Testing write buffer coherency: ok
[ 0.005430] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.005460] Setting up static identity map for 0xc0527d48 - 0xc0527d94
[ 0.060544] CPU1: Booted secondary processor
[ 0.060579] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.060692] Brought up 2 CPUs
[ 0.060713] SMP: Total of 2 processors activated (108.00 BogoMIPS).
[ 0.060720] CPU: All CPU(s) started in SVC mode.
[ 0.061474] devtmpfs: initialized
[ 0.067831] kworker/u4:0 (19) used greatest stack depth: 6764 bytes left
[ 0.068648] pinctrl core: initialized pinctrl subsystem
[ 0.069301] regulator-dummy: no parameters
[ 0.070660] NET: Registered protocol family 16
[ 0.075165] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.076367] kworker/u4:0 (33) used greatest stack depth: 6572 bytes left
[ 0.087911] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.087925] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.087974] I/SUSPEND: [rtk_suspend_init:641] wakeup-gpio Cnt: en(1) act(0) list(-2)
[ 0.087987] I/SUSPEND: [rtk_suspend_init:721] gpio-output-change Cnt: en(0) act(0) list(-2)
[ 0.087996] I/SUSPEND: [rtk_suspend_init] set suspend-mode = ram
[ 0.088006] I/SUSPEND: [rtk_suspend_init] set set wakeup-flags = 0xc
[ 0.090091] kworker/u4:0 (94) used greatest stack depth: 6532 bytes left
[ 0.111665] bio: create slab <bio-0> at 0
[ 0.113013] SCSI subsystem initialized
[ 0.113728] usbcore: registered new interface driver usbfs
[ 0.113888] usbcore: registered new interface driver hub
[ 0.114107] usbcore: registered new device driver usb
[ 0.114377] [I2C0] mode=i2c, phy=0, port=0
[ 0.114392] [I2C] open I2C0 successed, reference cnt=1
[ 0.114424] [I2C0] KHz = 100, div_h = 127, div_l = 134
[ 0.114437] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.120594] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.130600] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.140593] =========================
[ 0.140604] = VER : 2.2
[ 0.140610] =========================
[ 0.140617] = PHY : 0
[ 0.140624] = PORT: 0
[ 0.140631] = MODEL: Saturn
[ 0.140638] = SPD : 100
[ 0.140645] = SAR : 0x024 (7 bits)
[ 0.140652] = TX FIFO DEPTH : 32
[ 0.140659] = RX FIFO DEPTH : 32
[ 0.140666] = FIFO THRESHOLD: 4
[ 0.140672] =========================
[ 0.141121] [I2C1] mode=i2c, phy=1, port=0
[ 0.141134] [I2C] open I2C1 successed, reference cnt=1
[ 0.141164] [I2C1] KHz = 100, div_h = 127, div_l = 134
[ 0.141175] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.141317] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1416 end
[ 0.160584] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.160726] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1416 end
[ 0.170624] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.170767] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1416 end
[ 0.180149] =========================
[ 0.180158] = VER : 2.2
[ 0.180164] =========================
[ 0.180171] = PHY : 1
[ 0.180178] = PORT: 0
[ 0.180185] = MODEL: Saturn
[ 0.180191] = SPD : 100
[ 0.180199] = SAR : 0x024 (7 bits)
[ 0.180206] = TX FIFO DEPTH : 32
[ 0.180212] = RX FIFO DEPTH : 32
[ 0.180219] = FIFO THRESHOLD: 4
[ 0.180226] = SDA GPIO : MISC_GPIO 52
[ 0.180233] = SCL GPIO : MISC_GPIO 51
[ 0.180240] = BUS JAM RECORVER 3: ON
[ 0.180245] = NON STOP WRITE : OFF
[ 0.180251] = GPIO RW SUPPORT : ON
[ 0.180257] =========================
[ 0.180678] [I2C2] mode=i2c, phy=2, port=0
[ 0.180689] [I2C] open I2C2 successed, reference cnt=1
[ 0.180715] [I2C2] KHz = 100, div_h = 127, div_l = 134
[ 0.180726] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.190115] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.200116] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.210105] =========================
[ 0.210114] = VER : 2.2
[ 0.210120] =========================
[ 0.210127] = PHY : 2
[ 0.210134] = PORT: -1
[ 0.210140] = MODEL: Saturn
[ 0.210147] = SPD : 100
[ 0.210155] = SAR : 0x024 (7 bits)
[ 0.210162] = TX FIFO DEPTH : 128
[ 0.210168] = RX FIFO DEPTH : 128
[ 0.210175] = FIFO THRESHOLD: 4
[ 0.210181] =========================
[ 0.210556] [I2C3] mode=i2c, phy=3, port=0
[ 0.210571] [I2C] open I2C3 successed, reference cnt=1
[ 0.210596] [I2C3] KHz = 100, div_h = 127, div_l = 134
[ 0.210607] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.220108] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.230562] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.240548] =========================
[ 0.240557] = VER : 2.2
[ 0.240563] =========================
[ 0.240570] = PHY : 3
[ 0.240577] = PORT: -1
[ 0.240583] = MODEL: Saturn
[ 0.240590] = SPD : 100
[ 0.240598] = SAR : 0x024 (7 bits)
[ 0.240605] = TX FIFO DEPTH : 128
[ 0.240611] = RX FIFO DEPTH : 128
[ 0.240618] = FIFO THRESHOLD: 4
[ 0.240624] =========================
[ 0.240993] [I2C4] mode=i2c, phy=4, port=0
[ 0.241004] [I2C] open I2C4 successed, reference cnt=1
[ 0.241028] [I2C4] KHz = 100, div_h = 127, div_l = 134
[ 0.241040] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.250550] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.260542] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.270540] =========================
[ 0.270549] = VER : 2.2
[ 0.270556] =========================
[ 0.270562] = PHY : 4
[ 0.270569] = PORT: -1
[ 0.270576] = MODEL: Saturn
[ 0.270583] = SPD : 100
[ 0.270590] = SAR : 0x024 (7 bits)
[ 0.270597] = TX FIFO DEPTH : 32
[ 0.270603] = RX FIFO DEPTH : 32
[ 0.270610] = FIFO THRESHOLD: 4
[ 0.270616] =========================
[ 0.270973] [I2C5] mode=i2c, phy=5, port=0
[ 0.270984] [I2C] open I2C5 successed, reference cnt=1
[ 0.271008] [I2C5] KHz = 100, div_h = 127, div_l = 134
[ 0.271019] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.280564] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.290536] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.300099] =========================
[ 0.300107] = VER : 2.2
[ 0.300114] =========================
[ 0.300120] = PHY : 5
[ 0.300127] = PORT: 0
[ 0.300134] = MODEL: Saturn
[ 0.300141] = SPD : 100
[ 0.300148] = SAR : 0x024 (7 bits)
[ 0.300155] = TX FIFO DEPTH : 32
[ 0.300162] = RX FIFO DEPTH : 32
[ 0.300168] = FIFO THRESHOLD: 4
[ 0.300174] =========================
[ 0.300537] [I2C6] mode=i2c, phy=6, port=0
[ 0.300548] [I2C] open I2C6 successed, reference cnt=1
[ 0.300573] [I2C6] KHz = 100, div_h = 127, div_l = 134
[ 0.300585] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.310109] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.320099] [drivers/i2c/busses/i2c-phoenix-priv.c] venus_i2c_bus_jam_recover 1376 start
[ 0.330097] =========================
[ 0.330107] = VER : 2.2
[ 0.330113] =========================
[ 0.330120] = PHY : 6
[ 0.330127] = PORT: 0
[ 0.330134] = MODEL: Saturn
[ 0.330140] = SPD : 100
[ 0.330148] = SAR : 0x024 (7 bits)
[ 0.330155] = TX FIFO DEPTH : 32
[ 0.330161] = RX FIFO DEPTH : 32
[ 0.330168] = FIFO THRESHOLD: 4
[ 0.330174] =========================
[ 0.330847] media: Linux media interface: v0.10
[ 0.331001] Linux video capture interface: v2.00
[ 0.332484] Bluetooth: Core ver 2.16
[ 0.332625] NET: Registered protocol family 31
[ 0.332635] Bluetooth: HCI device and connection manager initialized
[ 0.332651] Bluetooth: HCI socket layer initialized
[ 0.332665] Bluetooth: L2CAP socket layer initialized
[ 0.332694] Bluetooth: SCO socket layer initialized
[ 0.333172] cfg80211: Calling CRDA to update world regulatory domain
[ 0.334282] [rtp5901_mfd_init_1195:857] rtp5901 prop ERROR!!!!!
[ 0.334294] Switching to clocksource rtk_counter
[ 0.373155] NET: Registered protocol family 2
[ 0.373744] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.373801] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.373844] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.373887] TCP: reno registered
[ 0.373901] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.373927] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.374157] NET: Registered protocol family 1
[ 0.374526] RPC: Registered named UNIX socket transport module.
[ 0.374536] RPC: Registered udp transport module.
[ 0.374544] RPC: Registered tcp transport module.
[ 0.374552] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.375335] RPC major number: 240
[ 0.375354] rpc is not paused & suspended
[ 0.378580] rtk aes crypto engine enabled
[ 0.378712] rtk_rtc 1801b600.rtc: rtk_rtc_probe 424
[ 0.378740] rtk_rtc 1801b600.rtc: rtk_rtc rtcacr = 0x80
[ 0.379125] rtk_rtc 1801b600.rtc: rtc core: registered rtc as rtc0
[ 0.379713] input: venus_IR_input as /devices/virtual/input/input0
[ 0.381221] [arch/arm/mach-rtk119x/driver/irda/venus_ir.c] get reg-ir-dpir = 50ld us from dtb, regval=0x1350000lx
[ 0.395415] VFS: Disk quotas dquot_6.5.2
[ 0.395551] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.396110] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.396674] fuse init (API version 7.22)
[ 0.397372] msgmni has been set to 479
[ 0.398772] io scheduler noop registered
[ 0.398784] io scheduler deadline registered
[ 0.398835] io scheduler cfq registered (default)
[ 0.399114] Gemtek LED init
[ 0.430775] AudioIntrRead:132 can't find process for handling AudioIntrRead programID:98
[ 0.439812] AudioIntrRead: program:98 version:0 procedure:1 taskID:0 sysTID:4294967295 sysPID:4294967295 size:4 context:81c0283d atomic
[ 0.535834] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
[ 0.537557] 18007800.serial0: ttyS0 at MMIO 0x18007800 (irq = 194) is a 16550A
[ 0.537588] console [ttyS0] enabled, bootconsole disabled
[ 0.538488] 1801b200.serial1: ttyS1 at MMIO 0x1801b200 (irq = 163) is a 16550A
[ 0.550406] brd: module loaded
[ 0.556302] loop: module loaded
[ 0.557714] NF_LOW_PWR:0x0002002c, NF_SWC_LOW_PWR:0x0002002c
[ 0.557725] Realtek NAND Flash Driver Rev:I15bf5e (2018-06-01$)
[ 0.557732] (X)Enable interrupt mechanism of NAND driver.
[ 0.557739] Force disable FLASH_WP!!
[ 0.557746] g_regGPIODirBase = 0x1801bc00
[ 0.557753] g_regGPIOOutBase = 0x1801bc18
[ 0.557759] g_NFWP_no = 0
[ 0.557765] g_NFWP_value_en = 0
[ 0.557772] g_NFWP_value_dis = 0
[ 0.557778] g_NFWP_pinType = 0
[ 0.557784] Get parameter from register...
[ 0.557792] [rtk_nand_init]Bootcode size 0xc00000
[ 0.557799] [rtk_nand_init]Factory parameter size 0x400000
[ 0.557806] [rtk_nand_init]Disable NFCP...
[ 0.557819] [**Default**]RBA percentage: 5%
[ 0.557825] Disable software write protect!
[ 0.557832] nand_base_rtk version:0601-2018
[ 0.557839] (X)NAND_POWEROFF_CARDREADER_WITH_MULTI_READ
[ 0.557845] (X)NAND_READ_SKIP_UPDATE_BBT
[ 0.557851] rtk_nand_read_id
[ 0.557861] id_chain 1 = 0x9590da2c
[ 0.557868] id_chain 2 = 0xffff0006
[ 0.557878] READ ID:0x2c 0xda 0x90 0x95 0x6 0x0
[ 0.557887] One MT29F2G08ABAE chip has 1 die(s) on board
[ 0.557903] index(1) nand part=MT29F2G08ABAE, id=0x2cda9095, device_size=268435456, page_size=0x800, block_size=0x20000, oob_size=0x40, num_chips=0x1, isLastPage=0x0, ecc_sel=0x6
[ 0.557912] g_eccSelect 0x6[0x6]
[ 0.557921] [rtk_nand_scan],mtd->u32RBApercentage 5%
[ 0.558090] data==> 0x4e4fe4c0
[ 0.558098] oob_buf[0]==> 0xbb, page=0x40
[ 0.558108] [rtk_nand_scan_bbt] have created bbt B1, just loads it !!
[ 0.558119] [dump_BBT] Nand BBT Content
[ 0.558125] Congratulation!! No BBs in this Nand.
[ 0.558151] 4 cmdlinepart partitions found on MTD device rtk_nand
[ 0.558161] 4 cmdlinepart partitions found on MTD device rtk_nand
[ 0.558169] Creating 4 MTD partitions on "rtk_nand":
[ 0.558182] 0x000000000000-0x000001d20000 : "Partition_000"
[ 0.559606] 0x000001d20000-0x000009940000 : "/"
[ 0.561018] 0x000009940000-0x00000df40000 : "misc"
[ 0.562285] 0x00000df40000-0x00000f340000 : "etc"
[ 0.563537] 0x000000000000-0x00000f340000 : "disc"
[ 0.564147] kworker/u4:0 (1050) used greatest stack depth: 6524 bytes left
[ 0.565057] [rtk_nand_profile] mtd_device_parse_register rc = 0x0
[ 0.565067] [rtk_nand_init]Ecc bit select 6
[ 0.565075] Realtek Nand Flash Driver is successfully installing.
[ 0.565095] tun: Universal TUN/TAP device driver, 1.6
[ 0.565103] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 0.565466] r8169 Gigabit Ethernet driver 2.5LK-NAPI loaded
[ 0.585284] r8169 18016000.gmac eth0: RTL8168g/8111g at 0xfe016000, 74:03:bd:96:b7:91, XID 10900800 IRQ 54
[ 0.585299] r8169 18016000.gmac eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.585402] [Ethernet] Watch link status change.
[ 0.585731] usbcore: registered new interface driver rtl8150
[ 0.585884] usbcore: registered new interface driver r8152
[ 0.586015] rtk_rbus_init:87
[ 0.586090] rtk_rbus_probe:27
[ 0.587516] dwc3 18020000.dwc3: no usb2 phy configured
[ 0.592789] platform 18020000.dwc3: Driver dwc3 requests probe deferral
[ 0.593530] rtk-usb2phy 18028280.usb2phy: drivers/usb/phy/phy-rtk-usb2.c Initialized RTK USB 2.0 PHY
[ 0.593797] rtk-usb3phy 18013210.usb3phy: drivers/usb/phy/phy-rtk-usb3.c Initialized RTK USB 3.0 PHY
[ 0.593974] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.593984] ehci-platform: EHCI generic platform driver
[ 0.594259] ehci-rtk: EHCI realtek driver
[ 0.605561] [USB_PHY], addr = 0xd4, data = 0x9b
[ 0.605673] [USB_PHY], addr = 0xc0, data = 0xa1
[ 0.605683] [USB_PHY], addr = 0xc1, data = 0x30
[ 0.605693] [USB_PHY], addr = 0xc2, data = 0x9a
[ 0.605703] [USB_PHY], addr = 0xc4, data = 0xd6
[ 0.605712] [USB_PHY], addr = 0xc5, data = 0x1d
[ 0.605822] [USB_PHY], addr = 0xc6, data = 0xc0
[ 0.605934] [USB_PHY], addr = 0xd4, data = 0xbb
[ 0.605944] [USB_PHY], addr = 0xc0, data = 0x35
[ 0.605954] [USB_PHY], addr = 0xc1, data = 0xaf
[ 0.605964] [USB_PHY], addr = 0xc5, data = 0xf
[ 0.605974] [USB_PHY], addr = 0xc6, data = 0x18
[ 0.605984] [USB_PHY], addr = 0xc7, data = 0xe3
[ 0.606019] rtk-ehci 18013000.ehci: EHCI Host Controller
[ 0.606323] rtk-ehci 18013000.ehci: new USB bus registered, assigned bus number 1
[ 0.606909] rtk-ehci 18013000.ehci: irq 53, io mem 0x18013000
[ 0.624071] rtk-ehci 18013000.ehci: USB 2.0 started, EHCI 1.00
[ 0.625149] hub 1-0:1.0: USB hub found
[ 0.625204] hub 1-0:1.0: 1 port detected
[ 0.625758] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.625887] rtk-ohci 18013400.ohci: Rtk Dmp OHCI
[ 0.626191] rtk-ohci 18013400.ohci: new USB bus registered, assigned bus number 2
[ 0.626226] rtk-ohci 18013400.ohci: irq 53, io mem 0x18013400
[ 0.688936] hub 2-0:1.0: USB hub found
[ 0.688991] hub 2-0:1.0: 1 port detected
[ 0.689912] usbcore: registered new interface driver usb-storage
[ 0.690664] mousedev: PS/2 mouse device common for all mice
[ 0.691127] i2c /dev entries driver
[ 0.692965] Bluetooth: HCI UART driver ver 2.2
[ 0.692978] Bluetooth: HCI H4 protocol initialized
[ 0.692985] Bluetooth: HCILL protocol initialized
[ 0.692993] Bluetooth: HCI Three-wire UART (H5) protocol initialized
[ 0.693332] cpufreq: [RM_INIT]
[ 0.693346] cpufreq: Failed to obtain VDDARM: -517
[ 0.698284] cpufreq: Only frequency scaling available
[ 0.737241] cpufreq: [RM_INIT]
[ 0.737250] cpufreq: Failed to obtain VDDARM: -517
[ 0.742150] cpufreq: Only frequency scaling available
[ 0.768150] cpuidle: using governor ladder
[ 0.768157] cpuidle: using governor menu
[ 0.768284] sdhci: Secure Digital Host Controller Interface driver
[ 0.768291] sdhci: Copyright(c) Pierre Ossman
[ 0.768297] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.768482] mmc0: Hardware doesn't specify base clock frequency.
[ 0.774677] Trying to free nonexistent resource <0000000018010c00-0000000018010cff>
[ 0.864609] usbcore: registered new interface driver usbhid
[ 0.864615] usbhid: USB HID core driver
[ 0.864942] oprofile: no performance counters
[ 0.865176] oprofile: using timer interrupt.
[ 0.865258] Netfilter messages via NETLINK v0.30.
[ 0.865271] nfnl_acct: registering with nfnetlink.
[ 0.865317] nf_conntrack version 0.5.0 (3836 buckets, 15344 max)
[ 0.865482] ctnetlink v0.93: registering with nfnetlink.
[ 0.865512] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 0.865518] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 0.866046] xt_time: kernel timezone is -0000
[ 0.866276] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.866409] TCP: cubic registered
[ 0.866473] NET: Registered protocol family 10
[ 0.867074] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 0.867225] NET: Registered protocol family 17
[ 0.867339] Bluetooth: RFCOMM TTY layer initialized
[ 0.867359] Bluetooth: RFCOMM socket layer initialized
[ 0.867365] Bluetooth: RFCOMM ver 1.11
[ 0.867372] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 0.867378] Bluetooth: BNEP filters: protocol multicast
[ 0.867388] Bluetooth: BNEP socket layer initialized
[ 0.867395] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 0.867405] Bluetooth: HIDP socket layer initialized
[ 0.867598] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.867612] avcpu: audio & video cpu driver for Realtek Media Processors
[ 0.868326] realtek_thermal 180171c8.thermal: [rtk_thermal_probe_of] thermal flags is 0xc
[ 0.869206] thermal thermal_zone0: [rtk_thermal_bind] ( (null) ce367200)
[ 0.869217] thermal thermal_zone0: [rtk_thermal_bind] max_state = 11
[ 0.869239] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed upper:4
[ 0.870554] RTK USB3 phy init
[ 0.875781] [00] 40080010
[ 0.875888] [01] a8780110
[ 0.875994] [02] 60460210
[ 0.876100] [03] 27710310
[ 0.876206] [04] b2f50410
[ 0.876312] [05] 2ad70510
[ 0.876418] [06] 00010610
[ 0.876524] [07] 32000710
[ 0.876630] [08] 35920810
[ 0.876736] [09] 325c0910
[ 0.876842] [0a] d6430a10
[ 0.876948] [0b] a9090b10
[ 0.877054] [0c] c0080c10
[ 0.877160] [0d] ff280d10
[ 0.877267] [0e] 20100e10
[ 0.877373] [0f] 80000f10
[ 0.877479] [10] 000c1010
[ 0.877585] [11] 4c001110
[ 0.877691] [12] fc001210
[ 0.877797] [13] 0c811310
[ 0.877903] [14] de011410
[ 0.878009] [15] 00001510
[ 0.878115] [16] 00001610
[ 0.878221] [17] 00001710
[ 0.878327] [18] 00001810
[ 0.878433] [19] 38041910
[ 0.878539] [1a] 12601a10
[ 0.878645] [1b] ff0c1b10
[ 0.878752] [1c] cb1c1c10
[ 0.878858] [1d] a03f1d10
[ 0.878964] [1e] c2001e10
[ 0.879070] [1f] 90001f10
[ 0.879176] [20] 94ff2010
[ 0.879282] [21] aaff2110
[ 0.879388] [22] 00512210
[ 0.879494] [23] db602310
[ 0.879600] [24] 08002410
[ 0.879706] [25] 00002510
[ 0.879812] [26] 00042610
[ 0.879918] [27] 01d62710
[ 0.880025] [28] f8402810
[ 0.880131] [29] 30802910
[ 0.880237] [2a] 30832a10
[ 0.880343] [2b] 20382b10
[ 0.880449] [2c] ffff2c10
[ 0.880555] [2d] ffff2d10
[ 0.880661] [2e] 00002e10
[ 0.880767] [2f] 00002f10
[ 1.080688] [USB2_PHY], addr = 0xd4, data = 0x9b
[ 1.080697] [USB2_PHY], addr = 0xc0, data = 0xa1
[ 1.080704] [USB2_PHY], addr = 0xc1, data = 0x30
[ 1.080711] [USB2_PHY], addr = 0xc2, data = 0x9a
[ 1.080717] [USB2_PHY], addr = 0xc4, data = 0xd6
[ 1.080724] [USB2_PHY], addr = 0xc5, data = 0x1d
[ 1.080731] [USB2_PHY], addr = 0xc6, data = 0xc0
[ 1.080739] [USB2_PHY], addr = 0xd4, data = 0xbb
[ 1.080746] [USB2_PHY], addr = 0xc0, data = 0x35
[ 1.080753] [USB2_PHY], addr = 0xc1, data = 0xaf
[ 1.080759] [USB2_PHY], addr = 0xc5, data = 0xf
[ 1.080766] [USB2_PHY], addr = 0xc6, data = 0x18
[ 1.080773] [USB2_PHY], addr = 0xc7, data = 0xe3
[ 1.180978] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[ 1.181253] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3
[ 1.181998] xhci-hcd xhci-hcd.2.auto: irq 53, io mem 0x18020000
[ 1.182575] xHCI xhci_add_endpoint called for root hub
[ 1.182583] xHCI xhci_check_bandwidth called for root hub
[ 1.182796] hub 3-0:1.0: USB hub found
[ 1.182837] hub 3-0:1.0: 1 port detected
[ 1.183107] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[ 1.183323] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4
[ 1.183927] xHCI xhci_add_endpoint called for root hub
[ 1.183934] xHCI xhci_check_bandwidth called for root hub
[ 1.184154] hub 4-0:1.0: USB hub found
[ 1.184191] hub 4-0:1.0: 1 port detected
[ 1.184820] ubi0: attaching mtd1
[ 1.186085] nand_read:1048 allocate from dma_alloc_coherent, nrBuffer=0xc4110000, nrPhys_addr=0x04110000
[ 1.373345] hub 3-0:1.0: port 1 portstatus 101 portchange 00
[ 1.373357] hub 3-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 1.478095] ubi0: scanning is finished
[ 1.483280] ubi0: attached mtd1 (name "/", size 124 MiB)
[ 1.483289] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.483297] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.483304] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.483311] ubi0: good PEBs: 993, bad PEBs: 0, corrupted PEBs: 0
[ 1.483317] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.483326] ubi0: max/mean erase counter: 102/2, WL threshold: 1024, image sequence number: 1786586017
[ 1.483333] ubi0: available PEBs: 0, total reserved PEBs: 993, PEBs reserved for bad PEB handling: 39
[ 1.483349] ubi0: background thread "ubi_bgt0d" started, PID 1137
[ 1.483361] ubi1: attaching mtd3
[ 1.493219] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 1.535361] hub 3-1:1.0: USB hub found
[ 1.535918] hub 3-1:1.0: 4 ports detected
[ 1.544438] ubi1: scanning is finished
[ 1.548798] ubi1: attached mtd3 (name "etc", size 20 MiB)
[ 1.548808] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.548815] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.548822] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.548829] ubi1: good PEBs: 160, bad PEBs: 0, corrupted PEBs: 0
[ 1.548836] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.548844] ubi1: max/mean erase counter: 4098/3298, WL threshold: 1024, image sequence number: 1115039450
[ 1.548852] ubi1: available PEBs: 0, total reserved PEBs: 160, PEBs reserved for bad PEB handling: 22
[ 1.548867] ubi1: background thread "ubi_bgt1d" started, PID 1142
[ 1.548874] ubi2: attaching mtd2
[ 1.568194] hub 4-0:1.0: port 1 portstatus 203 portchange 00
[ 1.568207] hub 4-0:1.0: port 1, status 0203, change 0000, 5.0 Gb/s
[ 1.693193] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 1.719464] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted.
[ 1.729315] hub 4-1:1.0: USB hub found
[ 1.730071] hub 4-1:1.0: 4 ports detected
[ 1.809647] ubi2: scanning is finished
[ 1.814366] ubi2: attached mtd2 (name "misc", size 70 MiB)
[ 1.814376] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.814383] ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.814390] ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.814397] ubi2: good PEBs: 560, bad PEBs: 0, corrupted PEBs: 0
[ 1.814404] ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.814411] ubi2: max/mean erase counter: 3/1, WL threshold: 1024, image sequence number: 55696754
[ 1.814419] ubi2: available PEBs: 0, total reserved PEBs: 560, PEBs reserved for bad PEB handling: 39
[ 1.814434] ubi2: background thread "ubi_bgt2d" started, PID 1147
[ 1.815118] block ubiblock0_0: created from ubi0:0(rootfs)
[ 1.815154] rtk_rtc 1801b600.rtc: setting system clock to 2024-01-19 21:30:14 UTC (1705699814)
[ 1.817724] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 1.821250] devtmpfs: mounted
[ 1.821475] Freeing unused kernel memory: 240K (c0740000 - c077c000)
[ 1.933165] hub 4-1:1.0: port 2 portstatus 203 portchange 00
[ 1.933181] hub 4-1:1.0: port 2, status 0203, change 0000, 5.0 Gb/s
[ 2.024205] usb 4-1.2: new SuperSpeed USB device number 3 using xhci-hcd
[ 2.043037] usb 4-1.2: Parent hub missing LPM exit latency info. Power management will be impacted.
[ 2.074561] kworker/u4:0 (1152) used greatest stack depth: 5708 bytes left
[ 2.075524] usb-storage 4-1.2:1.0: USB Mass Storage device detected
[ 2.075800] scsi0 : usb-storage 4-1.2:1.0
[ 2.093754] hub 4-1:1.0: port 2 portstatus 203 portchange 00
[ 2.741974] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 1165
[ 2.774880] nand_write:1643 allocate from dma_alloc_coherent, nwBuffer=0xc4330000, nwPhys_addr=0x04330000
[ 2.820040] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "etc"
[ 2.820051] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.820061] UBIFS (ubi1:0): FS size: 15745024 bytes (15 MiB, 124 LEBs), journal size 2793472 bytes (2 MiB, 22 LEBs)
[ 2.820068] UBIFS (ubi1:0): reserved for root: 0 bytes (0 KiB)
[ 2.820079] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID F4DA2625-01E0-4976-8F27-686A0482A44B, small LPT model
[ 2.821400] mount (1163) used greatest stack depth: 5468 bytes left
[ 2.841831] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 1168
[ 2.871703] UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc"
[ 2.871715] UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.871725] UBIFS (ubi2:0): FS size: 64249856 bytes (61 MiB, 506 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.871733] UBIFS (ubi2:0): reserved for root: 0 bytes (0 KiB)
[ 2.871743] UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID AC7F0A6D-76DA-483E-9169-E63055410F97, small LPT model
[ 3.097813] scsi 0:0:0:0: Direct-Access ASMT 2115 0 PQ: 0 ANSI: 6
[ 3.098979] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.099944] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 3.111225] date (1171) used greatest stack depth: 5444 bytes left
[ 3.915198] modprobe (1232) used greatest stack depth: 5396 bytes left
[ 9.495523] ldconfig (1344) used greatest stack depth: 5372 bytes left
[ 10.408345] python (1340) used greatest stack depth: 5348 bytes left
[ 10.742018] udevd[1369]: starting version 175
[ 15.394716] [DBG][rtk_read_ecc_page] page(0x4cd4) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 15.394731] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 15.394743] ubi0: fixable bit-flip detected at PEB 74
[ 15.394749] ubi0: schedule PEB 74 for scrubbing
[ 15.403081] [DBG][rtk_read_ecc_page] page(0x4cd4) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 15.403091] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 15.415497] ubi0: fixable bit-flip detected at PEB 74
[ 15.445233] ubi0: scrubbed PEB 74 (LEB 0:72), data moved to PEB 222
[ 31.024685] mdadm-raid (1590) used greatest stack depth: 5248 bytes left
[ 32.981958] write procfs ethernet wol_enable = 1
[ 33.073365] jnl: driver (lke_9.2.0 lke_9.2.0_r249539_b3, LBD=ON) loaded at bf81f000
[ 33.257169] ufsd: module license 'Commercial product' taints kernel.
[ 33.257183] Disabling lock debugging due to kernel taint
[ 33.273529] ufsd:: trace mask set to 0000000f
[ 33.273546] ufsd: driver (lke_9.2.0 lke_9.2.0_r249539_b3, build_host("KensComp"), acl, ioctl, bdi, sd2(0), fua, bz, tr, rsrc) loaded at bf82c000
NTFS support included
exFAT support included
Hfs+/HfsJ support included
optimized: speed
Build_for__Realtek_RTD1195_a4.x_k3.10.24_2015-05-29_lke_9.2.0_r249539_b3
[ 33.524889] cryptodev: driver 1.7 loaded.
[ 34.342500] r8169 18016000.gmac eth0: rtl_csiar_cond == 0 (loop: 100, delay: 10).
[ 34.351443] r8169 18016000.gmac eth0: rtl_csiar_cond == 1 (loop: 100, delay: 10).
[ 34.363228] r8169 18016000.gmac eth0: link down
[ 34.364870] r8169 18016000.gmac eth0: link down
[ 34.364975] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 34.540425] udhcpc (2246) used greatest stack depth: 5084 bytes left
[ 37.009089] r8169 18016000.gmac eth0: link up
[ 37.011483] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 37.059573] r8169 18016000.gmac eth0: rtl_csiar_cond == 0 (loop: 100, delay: 10).
[ 37.073519] r8169 18016000.gmac eth0: rtl_csiar_cond == 1 (loop: 100, delay: 10).
[ 37.089223] r8169 18016000.gmac eth0: link up
[ 44.245311] Gemtek LED write6
[ 44.249570] Gemtek LED write6
[ 58.337264] monit (4008): /proc/4063/oom_adj is deprecated, please use /proc/4063/oom_score_adj instead.
[ 62.479234] cpufreq: [RM_ENABLE]
[ 346.956168] [DBG][rtk_read_ecc_page] page(0x1da68) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 346.956207] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 346.956237] ubi1: fixable bit-flip detected at PEB 111
[ 346.956260] ubi1: schedule PEB 111 for scrubbing
[ 346.961164] [DBG][rtk_read_ecc_page] page(0x1da68) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 346.961198] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 346.961227] ubi1: fixable bit-flip detected at PEB 111
[ 346.961250] ubi1: schedule PEB 111 for scrubbing
[ 346.967177] [DBG][rtk_read_ecc_page] page(0x1da62) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 346.967211] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 346.968154] [DBG][rtk_read_ecc_page] page(0x1da68) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 346.968183] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 346.973296] ubi1: fixable bit-flip detected at PEB 111
[ 347.006869] ubi1: scrubbed PEB 111 (LEB 0:29), data moved to PEB 117
[ 349.007563] cpufreq: [RM_DISABLE]
[ 349.575128] systemd-logind[4240]: New seat seat0.
[ 349.578046] systemd-logind[4240]: New session c1 of user www-data.
[ 349.679424] systemd-logind[4240]: Removed session c1.
[ 349.681636] systemd-logind[4240]: New session c2 of user www-data.
[ 349.758244] [DBG][rtk_read_ecc_page] page(0x68f0) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 349.758259] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 349.758271] ubi0: fixable bit-flip detected at PEB 186
[ 349.758278] ubi0: schedule PEB 186 for scrubbing
[ 349.758498] [DBG][rtk_read_ecc_page] page(0x68f0) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 349.758508] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 349.758518] ubi0: fixable bit-flip detected at PEB 186
[ 349.758525] ubi0: schedule PEB 186 for scrubbing
[ 349.773053] [DBG][rtk_read_ecc_page] page(0x68f0) corrected ECC error, REG_BLANK_CHK reg: 0xffff0009
[ 349.773066] [DBG][rtk_read_ecc_page]REG_RSECC_NUM: 0xffff0001, REG_MAX_ECC_NUM: 0xffff0001, REG_ECC_PAGE: 0xffff0000
[ 349.775509] ubi0: fixable bit-flip detected at PEB 186
[ 349.805645] ubi0: scrubbed PEB 186 (LEB 0:871), data moved to PEB 179
[ 352.136085] cpufreq: [RM_ENABLE]
[ 458.344087] cpufreq: [RM_DISABLE]
[ 463.132522] cpufreq: [RM_ENABLE]
U-Boot env
Realtek> env print Buffalo_ModelName=LS510D Buffalo_PID=0x0000002C Buffalo_Region=EU Buffalo_SerialNum=10361090600004 Buffalo_UID=0 baudrate=115200 bootargs=console=ttyS0,115200 earlyprintk loglevel=4 bootcmd=bootr bootdelay=0 ethact=r8168#0 ethaddr=74:03:BD:96:B7:91 fdt_loadaddr=0x01FF2000 gatewayip=192.168.0.254 inspection=0 ipaddr=192.168.0.9 kernel_loadaddr=0x03000000 macCnt=1 manufactory_firmware=firmware_LS520D mtd_part=mtdparts=rtk_nand: netmask=255.255.255.0 rescue_audio=bluecore.audio rescue_dtb=rescue.nand.dtb rescue_rootfs=rescue.root.nand.cpio.gz_pad.img rescue_vmlinux=nand.uImage rootfs_loadaddr=0x02200000 serverip=192.168.0.200